CES "SS" TBE | SURE "Aeros" SRI | SURE "Sidewinder" TIP | SURE "Return" Recirc Hose | CUSTOM "PWR Core" FMIC | Hypertech "Tuned" | Turbosmart "Atmo" BOV | MSD DashHawk | CP-e REM | SURE "Anchors" Shifter Bushings | JBR SSP and Weight | JBR Heavy Knob |Redline Hood Quick LIFT ELITE | TEIN "SS" Coilovers | Front - Rear HOTCHKIS Swaybars | Front - Rear DBA 4000 Slotted Rotors | A1RM Brake Pads | 18x8 +45 Tenzo-R Cuzco Black V1 | 235/40/18 Michelin Pilot Super Sport | Safe n' Sound baby Seat lol
Sure thing mate. Ill be sure to let u know once the bits arrive.
http://www.mazdaspeedforums.org/foru...d.php?t=139503
Post from Haltech detailing all the SURE issues...
Sent from my Galaxy Nexus using Tapatalk 2
Ok so shits looking bad ATM so I'm going to add comment based on my experience with SURE products in my car, this isn't to support or defend them in the current situation.
So currently in my car I have SUREs rear engine mounts and both diff mounts (one of which has caused a member here great expense) firstly the rem, kinda something hard to **** up given its design on a 6! This part added what I expected and have no complaints. Secondly the diff mounts, now the first version of the dreadnaught has been known to fail as you could imagine I'm a little worried so in fairness I emailed SURE in regards to the strength of this part the response now that I think back wasn't great lol basically my expense to send old one back ( get used to that though from buying over seas) and 50% off new type diff mount. (Can't sell my old one to one of you suckers now :/) ATM I have had no part fails, I also haven't done many k's and not running any hp to test these parts also given that I have aggressive clutch the odds have to be against the diff mounts based on other members failures. Apart from that while the parts are not broken it feels tight.
Being a 6 owner and not having same options as the 3 owners you get excited about new product releases, may have to hold that excitement :/ that's the down side of this situation for SURE.
Every man should have a V8 ute.....with a Chev badge.....and a Southern Cross sticker! Mods? What mods?
Just noticed this today, thought id quickly check my aeros, lo and behold:
Crack through side of maf housing, seriously? Disappointed. All SURE stickers on my car have gone in the bin
Going to pull this and REM out soon and check my bushings and intake for leaks around MAF...
Last edited by dazza; 04-03-2013 at 07:24 PM.
Glad this thread came up. Not going anywhere near SURE now.
From the mazdaspeed forum the REM that have failed show black urethane the "street" version. Unsure what the "track" urethane failure rate is but track days, my daily, test and tunes etc has held up well. Now after reading about side mounts same use and abuse. Has held up again not sure of actual failure rate but wouldn't be too happy if my engine fell out! I check them all the time however only time will tell.
Maybe I should keep my CPe REM now as a back up! Lol
Hmmm I think simply on principal I'll be replacing my sure REM and SSP. Question is what brand/s do most people reccomend??
I have been using Cpe engine mounts n never had a problem.
The dipole opposite to Sure is HTP www.hitunedperformance.com . Go there, bask in the warmth of awesome customer service, updates on delivering, seemingly well thought out products (I'm not an engineer).
It didn't come in a box like a Rolex, or as well packed as Corksport, but... It made it. On time.
Sent from Samsung Note 2 LTE
Last edited by Yeldarb; 04-03-2013 at 08:10 PM.
Jbr or corksport gear has served me well
Newbie FAQ My Build Thread
From stock, to GT3071, to substantially less modded, many lessons learned!
3" HTP | 100 Cel DP | Autotech HPFP | AP V3 - Self Tuned on E20 | JBR RSB | CPE S2 REM | JBR Shifter Bushings
Awesome thanks Sam
Just really sux that I paid such a premium on parts that are critical to safety. They are the only Sure products i have so i do hope that mine are okay and one of the lucky ones.
Signature updated...pending further update
All my mods are Sure products
Only problem I ever had was my intake was too long. I had to modified it to fit
I did mention it to Cullen and he blamed user error and install. Can't see how that is possible, but I let it go
Otherwise everything is working well
Sure Rem, TIP, Aeros, Shortcut, Countershift, Gear knob, and Anchors
I'm yet to install my Oil Rig and Ventus Multiport. I am worried, but will have to see how we go
Will check my MAF sensor tomorrow
Snapped by Tangcla - FB Page
Currently RaydTuned
Lots of love from 2XS Racing & Dan's Garage Detailing
Thanks for the update for this Sam. I have been looking at SURE for some parts but will hold off for now.