Melbourne Group Installation will be done by 09/04/13 between 9am and 6pm near the airport. Not available from 5pm and 6pm due to pre bookings.
Hi Andrew,
Any option for install in Perth area. or any recommended nstallers in Perth area?
Thanks..
Aneoz
Hi Anoez
Sorry about that. We do not plan for GI in Perth but I think it could be done by any installer in your area. It is not big job, if the installer follows a manual.
Please email me, I will send you an installation manual then you could show some of local installers if they are able to do this.
ajung000745@ymail.com
sorry to bring up an old thread, but anyone interested in a gi for this in brissie?
would be keen to get it done!!
+1 Sydney price dependant
The Guy is in Sydney, in Auburn.
Dunno if he will offer a GB price, didn't before.
Unit still works after a few yrs now, so no complains here apart from the fact that i got the early model with no guidance lines : /
I had my reverse camera installed and integrated into my GPS screen on the weekend, and I thought I'd post up some thoughts on here
The install time was quick, just under 1.5 hours, $350 total. I watched him work as I was really curious to see how it's installed and the insides of my dash. He was a really friendly guy, and was happy to explain anything I asked about.
How does it work? A secondary circuit board is installed within the GPS unit, on top of the main circuit board (see the attached pictures). A small black camera is mounted just above the number plate and the cable is run through the passenger side. The GPS screen works as per normal until reverse is engaged, and is instantly reverted back to normal once you shift out of reverse. It's triggered by the reverse lights, which I think is a pretty smart way to do it.
Clarity is pretty good, even at night (see the attached pictures). The GPS screen is pretty small, so it's restricted by that but it's big enough. It has a slight flicker for a moment when the camera first switches on, but that's pretty minor.
Overall I'm pretty happy! Makes reversing a little safer
I don't suppose that this product is still available?
Newbie FAQ My Build Thread
From stock, to GT3071, to substantially less modded, many lessons learned!
3" HTP | 100 Cel DP | Autotech HPFP | AP V3 - Self Tuned on E20 | JBR RSB | CPE S2 REM | JBR Shifter Bushings
Cheers, I've sent off an email to Andrew
Another one here interested in Adelaide
No response from Andrew, I've gone another path and bought an Eonon Android based head unit and reversing camera
Does he still do these and anyone got this done to their car in Brisbane ?
Does anyone here have a installation manual? I just bought a car and pretty sure I have one of these installed but it only activates sometime. The wiring might be all wrong, i wanna check it out and give it a fix.
EDIT: Think I found it
Last edited by MiR; 01-08-2016 at 05:17 PM.
Hi all,
I have been in contact with Andrew and am in the process of buying a unit.
Interested in a GB, and possible install for Adelaide if anyone is keen.
How do you get in contact with Andrew? Can you pass on his details?