Hypertech Max Energy Sport Power Programmer

[advancespeedJEFF]

Hey all,

You guys know what this is, so no introduction needed, but I'll include info for you guys.

For those not familiar, Hypertech has seen gains of up to 66hp and 22tq on the MPS!!



Hypertech Max Energy Sport Programmer for Mazda Vehicles
Part Number: 62003

Compatible with the following vehicles:

2007 2008 2009 Mazdaspeed3 (MPS)
2007 2008 2009 RX-8
2006 2007 2008 2009 MX5 Miata
2003 2004 2005 2006 2007 2008 Mazda3s (Axela)
2006 2007 Mazdaspeed6 (Mazda 6 MPS)
2003 2004 2005 2006 2007 2008 Mazda6i

Price on these is currently set at $386.99 + shipping
Contact me with your postal code and I will give you a better price via PM

Info about the unit:
The Max Energy Power Programmer extracts every bit of energy possible out of every molecule of fuel giving you more mpg at part throttle and more power at wide open throttle. All this and more... Only from Hypertech!Hypertech Max Energy Tuner 62003

* Maximum Horsepower & Torque
* Improved Fuel Economy
* Raise Top Speed Limiter
* Raise "RPM" Rev Limiter
* Adjust Shift Points & Firmness
* Recalibrate Speedometer
* Lower Cooling Fan On/Off Temps
* Read, Display and Clear DTCs
* Internet Updateable (USB included)
* Easy Plug-And-Play Installation

[Caffeine Fiend]

Hi Jeff, know of any updates on the Gen II Mazdaspeed 3?

I contacted Hypertech a few months ago and they were pretty vague on a timeline. There was also word about that they've started beta testing, but that was a little while ago. Just wondering whether you had any info?

Cheers,

Dan


Sent from my iPhone using Tapatalk

[ash460]

Hey Dan, I read on msf that they are starting beta testing this week.

[Jeev]

Question on Lower Cooling Fan ON/OIFF temps. Can we adjust this ourselves, or is it just included with the flash?

[Caffeine Fiend]

Hey Dan, I read on msf that they are starting beta testing this week.

Oh bugger. I thought they'd been going for a few weeks already.

Ah well, at least there's some progress of a sort. Cheers mate

[SP23HO]

Oh bugger. I thought they'd been going for a few weeks already.

Ah well, at least there's some progress of a sort. Cheers mate

Yeh, sorry, the information i gave should have been more clear.

They were still collecting information at the time.

But, any news is good news right? :P

[Caffeine Fiend]

Sent from my iPhone using Tapatalk

[KRNAGE]

even advertised price is good, bump for SiteVendor

[laser beam]

edited

[advancespeedJEFF]

as of right now, they're still testing it. last i checked they were just working on getting the testing started, but that was a couple weeks ago.

as for the temperature, it says that it allows you to lower the fan temps to match your thermostat temps.

The Max Energy allows you to adjust the “on/off” temperatures of your vehicle’s electric cooling fans to match a lower temperature thermostat, such as a Hypertech PowerStat. A low-temperature thermostat produces a cooler, denser intake charge, is less likely to detonate under heavy loads and allows the engine to make more power.

[Caffeine Fiend]

Thanks Jeff.

I hope it comes out soon. Cobb already have the AccessPORT available for 2010/2011 Gen IIs

[yzfr1000]

PM Sent - Am interested, price pls for post to NSW 2500

[advancespeedJEFF]

okay, still having issues with fedex, and we're working to get it resolved with them. For the time being, i will be giving ups quotes. UPS is working on getting us better rates for international.

thanks for being patient with us right now.

[ash460]

Hypertech's site is showing this on their home page as available for 2010 MS3. 66hp gain it is claimed.

[bd581]

Good news for the gen2 guys and girls at last.

Note though, that 66hp gain is the maximum difference, not peak.
It's about 66hp more at high rpm when power of the stock engine has dropped of to not much.

[Logan]

Sweet might get one of these for my Gen 2. What's the deal when it comes to servicing, can just reflash back to stock?

Sent from my Nexus S using Tapatalk

[Nirvandan]

Yup, you can just re-flash back to stock.

---------- Post added at 06:02 PM ---------- Previous post was at 05:47 PM ----------

From the SURE Motorsport facebook page on their SRI (AEROS)

SURE Aeros, Overhauled!
-AccessPORT & Hypertech Compatible
-New MAF Housing Design
-New Dry Filter
-Element Shield Available

COMING SOON! Stay Tuned... Thank you!

[SarcasticOne]

pity you cant actually select a 2010-2011 mazdaspeed 3 yet

[SP23HO]

i could find it under 2009.

This is the year Gen II started coming off the production line.

The year of manufacture shouldn't affect it as long as its the right model should it?

[SarcasticOne]

i think 2009 is still gen 1's...
http://www.hypertech.com/Performance..._Turbo_CAI.pdf
2006_2009_mazdaspeed3_6_2_3L_Turbo is the file name of the dyno graph