SURE Motorsports products

[Rayd]

Lol @ -8 that's abit excessive !

[naasif]

The passenger and driver's side mount is now available on Street Unit website -

link here - MAZDASPEED 3 S3 Motor Mount

and here - MAZDASPEED 3 S3 Motor Mount

Anyone have any experience in replacing either of these ? ie what's the feel like, NVH etc ?

[Jamesa2z]

Spy shots





Peter "SLIXX"

Thanks mate. They certainly aren't slowing down in their development of new products.

Per FB, looks like a full exhaust system may be in the pipeline.as well. That could be another thing to consider.... I need a pay rise!

Sent from my GT-I9210T using Tapatalk 2

[slixx]

Thanks mate. They certainly aren't slowing down in their development of new products.

Per FB, looks like a full exhaust system may be in the pipeline.as well. That could be another thing to consider.... I need a pay rise!

Sent from my GT-I9210T using Tapatalk 2

Here here!


Peter "SLIXX"

[slixx]

Ok update on the engraving
I spoke to Cam's Engraving in Frankston and he had a look and was eager to etch the design

Cam has been in the business over 30 years and has hand engraved many designs and specialises in Harley Davidsons bikes (don't wanna piss those guys off!)

He said because of the density of the Stainless Steel that he would start off with the computer and then go over it by hand to give the design more definition

I'm probably going to just get the outline of the 'MPS' logo with the H-Pattern so that it doesn't take too much away from the knob itself rather than filling in the logo

$45.00 is his price


Peter "SLIXX"

[SMOKEY]

So not 10 bucks anymore?

[slixx]

So not 10 bucks anymore?

$10.00 was for laser engraving (looks black like the SURE logo)

$45.00 is for actual engraving (looks silver etched into the Stainless steel)


Peter "SLIXX"

[SMOKEY]

Got ya, I think I'll stick to the logo sticker - I like the smoothness of the knob in my hand......(hey, there was no other way to say it!)

[dave197]

Spy shots





Peter "SLIXX"

What are the Guerilla arms?

[Caffeine Fiend]

Guerilla, as in warfare against bad handling? Lol

Or meant to be Gorilla and some marketing nuffy messed up?

Sent from my Galaxy Nexus using Tapatalk 2

[dave197]

either way what are they ? engine mounts?

[Caffeine Fiend]

Nah they're adjustable camber arms

Sent from my Galaxy Nexus using Tapatalk 2

[naasif]

The Torq S3 mounts are officially on the SURE web site -

Torq S3

Can someone clarify ? - What the US guys call the Passenger mount is actually on our drivers side ? (same goes for the Driver's side mount ? )

Edit: Just a found a good link for noob like me that explains where they are located - http://www.zoomsquared.com/resources...n/motor-mounts

[slixx]

It be interesting to know what vibes you would get with and without the REM


Peter "SLIXX"

[slixx]

The Torq S3 mounts are officially on the SURE web site -

Torq S3

Can someone clarify ? - What the US guys call the Passenger mount is actually on our drivers side ? (same goes for the Driver's side mount ? )

Edit: Just a found a good link for noob like me that explains where they are located - http://www.zoomsquared.com/resources...n/motor-mounts

This is interesting read.
I don't think I can do this mod !!


Peter "SLIXX"

[naasif]

This is interesting read.
I don't think I can do this mod !!


Peter "SLIXX"

The passenger mount (driver's side in OZ) on the left when facing the front of the car isn't that bad. At least it's visible and all you need is a trolley jack. Instructions here - PMM failure + AWR passenger motor mount install - Mazdaspeed Forums

I just read the drivers side mount..that looks way complicated - link here - How to: Install TRZ Transmission Mount

I'm concerned about added NVH into the cabin though, although with the SURE REM with the Street option, I didn't notice it after a few days.

[slixx]

The passenger mount (driver's side in OZ) on the left when facing the front of the car isn't that bad. At least it's visible and all you need is a trolley jack. Instructions here - PMM failure + AWR passenger motor mount install - Mazdaspeed Forums

I just read the drivers side mount..that looks way complicated - link here - How to: Install TRZ Transmission Mount

I'm concerned about added NVH into the cabin though, although with the SURE REM with the Street option, I didn't notice it after a few days.

Hmm it's interesting.
You gonna do it @naasif ?
Do you think the only benefit is the reduction of wheel hop ?

All I have read if you are going to do this mod, then install a BSD as well produces alot of vibration




Peter "SLIXX"

[naasif]

Hmm it's interesting.
You gonna do it @naasif ?
Do you think the only benefit is the reduction of wheel hop ?

All I have read if you are going to do this mod, then install a BSD as well produces alot of vibration




Peter "SLIXX"

Not sure..might say no at this point. I don't want increased vibrations.

[slixx]

+1

Sure's response on Facebook wasn't very conclusive, but I guess I wasn't really expecting anything negative!!


Peter "SLIXX"

[naasif]

SURE have some discounts on their webpage - https://www.facebook.com/photo.php?f...type=1&theater