I can't remember the CB off hand, so can't confirm or otherwise on that.
Originally Posted by
RED3VIL
19x8.5
5x100/114.3
Offset 45
CB 73.1
11.33kg
I would try to get it in 19x8, and higher offset if possible. 19x8+45 should be good and doable however you'll need gaurd clearance attended to.
If you go the extra 0.5" @ 19x8.5, the clearance issues might be more than you bargained for. Wheel face will be flush with the panelwork @ 8" wide +45 offset.
8.5" and they'll stick out another 0.25" - you can pull them in 7mm if you get +52 offset, and the 8.5" wide wheel face would be flush again. Not sure how you'd go for inner clearance then. Might start to rub strut bits.
"Blue Meanie" 2007 Aurora Blue MPS 3 - 18x8.5+44 SSR GTX01 - 235/40R18 Michelin PS5 - 3.5" ETS TMIC - CPE stg 2 mount - HKS/CPE BPV - 2XS inlet - 2XS short shift - Corksport turbo manifold - HT 98 octane tune - Leather/Aluminium handbrake - Momo shifty knob - 7" touchscreen - JDM Mazda Retractable dashtop screen assembly - Bespoke Raspberry Pi Android based GPS/Carplay and instrumentation - 36AH reserve battery and C-TEK isolator - TEIN Street Advanced coilovers 1" drop - Superpro bushings - 220Kw/410Nm.
"Lipstick" 2013 Velocity Red MPS 3 - 18x7.5+48 Enkei RPF1 -225/40R18 Federal RS-RR - CPE TMIC - COBB inlet - CPE stg 2 mount - COBB Stage 1 98 octane tune - COBB shifty knob - 2XS short shift - 2XS turbo manifold.