Well tonight I installed daylight LED strip lighting to the front lights.
The LED strip tucks between the front bar and light housing and faces up in to the lights. The passenger side installed fine, the strip tucked firmly between so it wont move.
I then installed the drivers side LED strip and that side was a lot tighter so I needed to force the strip in pretty hard to get it in properly.
Once in place I tested it and only half the LED's worked, forcing them in had broken the strip
So I'm going to have to work out how to remove the drivers light at least enough to fit the strip then fix the light back over the top of the LED's.
So does anybody know how to remove the drivers side light? (I did try taking off the two top bolts but didnt move so there must be more to it)