User Tag List

Results 1 to 7 of 7

Thread: Cel comes and goes

  1. #1

    Default Cel comes and goes

    After driving to Adelaide a few months ago after about a week in Adel. upon starting my gen 2 MPS it ran very rough, I then started it again after abt 5 min and it ran like nothing had happened but a CEL light was on. After driving for about an hour and had the engine off for a couple of hours when I started it again, no CEL. After driving back 3000 km to Darwin and another 2 thou it did it again. Another 4thou and it did it again today. The car still makes 187kw atw, this odd event just pops up every now and then. Any ideas?

  2. #2

    Default

    Might want to list what mods you have

  3. #3
    Join Date
    Jan 2009
    Location
    Coomera, Gold Coast
    Age
    41
    Posts
    3,565
    Blog Entries
    1

    Default

    Sounds intake related to be honest but does depend on what mods you have.

  4. #4

    Default

    Quote Originally Posted by boost View Post
    Might want to list what mods you have
    It has a full turbo back 3" stainless exhaust and a chiptorque exede. The same mods my gen1 had but that had no CELs

  5. #5

    Default

    can u get the cel read? or do you have a dashhawk?

    ---------- Post added at 02:06 PM ---------- Previous post was at 02:05 PM ----------

    what intake are you running? stock?
    if so im going to guess the cpe dp

  6. Default

    Get the closed loop fuel trims retuned. Or at least checked.

    I believe Xede can modify these signals too.

  7. #7

    Default

    Got it checked out today, no faults and no faults in the memory. I guess it sorted its self out.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •