User Tag List

Results 1 to 3 of 3

Thread: Cold Pipe in the MPS3

  1. #1

    Default Cold Pipe in the MPS3

    I bought a meth kit for the MPS off of Jmac and it comes with a predrilled mazda 3 MPS cold pipe. I found out what the difference is from the 6 and the 3. The cold pipe off of a 3 is only a 90 degree bend and then uses a 90 degree silicon bend to attach it to the throttle body. In the 6 however this is a full 180 degree metal piece. I assume they revised this for the 3 cos it makes putting the TMIC back on much easier.

    Anyway the thing I really need to know is the dimensions for this silicon piece. I got one off the internet which is 2.5" because thats what I thought it was but it doesn't fit onto the cold pipe. Is it 2.75" then? I assume the throttle body is identical on the 6 and 3.

    Thanks

  2. #2

    Default

    It is 2.75"

  3. #3

    Default

    Yeah figured itd be the case.

    Soooo anyone want to buy a silicon 2.5" 90 degree bend black in colour?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •