Try here in NSW, think we are the worse state anyone care to disagree?
- - - Updated - - -
Think that might need another thread
Ok I'll post my new painted rims soon.
From prep to final on car
It just looks like the wheels are gonna fall off
Peter "SLIXX"
Not a fan. Looks ridiculous and unpractical
Hey Guys,i have ordered some 18 by 8 + 40 running on 225/40/18 is this enough offset for a Gen1 i don't want no scrubbing .
Thanks Guys in advance ,getting a bit worried might cancel my order.
Hope they sit ok on the Gen1. I had a set, with the same specs, test fitted to my Gen2 before ordering, the rear will just fit in if it were to be lowered, possibly will need the inside lip rolled, the fronts actually sits slightly outside the guard so that would be a problem if lowered too much. With my suspension being stock, I doubt that I would have any issues. I will post up as soon as they arrive.
//BNR3//HDI FMIC//HTP 3" intake//
// Ecutek tune//CPE DP/ HPFP//
// Tein performance street Coilovers //
// Whiteline RSB// 240kwATW bum Dyno //
@chef im running 18x8.5 +30 offset and i rolled my guards and its fine so yours should be more than fine
Forgot to add the 225/45 tyres
'05 6 MPS | BNR S3 | JBR 3.5" Intake | Corksport Airbox | CP-E 3.25" TMIC | M2 DP | CP-E CBE | CP-E/TT Diff Mounts | Autotech HPFP Internals | JBR REM, PMM, TMM | SURE Shortcut | SURE Countershift | SURE Anchors | Denso ITV22s | JBR TIGs | EGR Delete | Coolant Bypass | PTP Inj Seals | MD OCC | H&R Springs | Bilstein B8 Shocks | Car-LED Tails | Badgeless Grille | 6000k HIDs | OZ Ultraleggera 18x8 +48
Seems to be a bit of stretch... What tyres Andre?
Sent from Samsung Note 2 LTE
Tyres are 225/45. Will probably go to 235/40's after this set.