Hi there everyone. Completed the CP-E CAI, Cobb Turbo Inlet Hose and Turbosmart Dual Port BOV with Daniel and Simon from MPSGarage today. Thought that I would let you know a few things about how the install went and the post install results in the hope that this may help someone out with their install and the possibility of a feeling of dismay in the event that they choose to dyno straight after the install.
To start out, the base run peaked at 154atw. Post install, the thing only pushed to 158.9atw, and the air/fuel mix went from a 12 to a 9 and then off the charts - basically very rich, but interestingly progressively better with each run. Unfortunately, we had all run out of time, so we decided to conclude this at another date. During the drive home, for the first ten or so kms the car drove quite sluggish. There was then a 15 or so minute freeway portion of driving, and at this time, the car started to completely transform.
Throttle response became incredibly immediate and this continued and increased positively over the next 30 mins of driving. Obviously, whereby this 'learning' engagement may not have been always required on the Gen1's, I feel that this is something that the revised ECU may possibly need to do on the Gen2. There was also a solid midrange increase in boost from 14-16.5psi. Not bad for initial runs. I know you will all be wanting dyno prints, however in the haste of running out of time and the shop closing, left my dyno sheets there.
Due to personal commitments, I will not have an opportunity to dyno the car until two weekends from now, where I believe my comments will be supportive of the newly learnt behaviour. What I can tell you is that the intake sound is ridiculous - but only in a fantastically good way, and the butt-dyno is quite impressed.
Further to this, please let me dispel any rumours that the Gen1 CAI will not support the Gen2. This CAI bolted straight in without a hassle. Don't believe the hype, guys.
My car will be the test mule for the MPSGarage's soon to be marketed Gen2 Stage 1 kits in both CAI and SRI format, in conjunction with BOV, Inlet Pipe and CPE dump pipe (which Daniel advises me will be available shortly). Exciting days, people. All runs to date have been filmed in twin camera hi-def video, so we will be able to let you know how we are progressing with this combo in due course.
Promise more to come soon, guys.
Mark