4-tip exhaust...

[MUZZA]

Anyone seen Quad tips on a BL MPS3?

[TD]

Anyone seen Quad tips on a BL MPS3?

Do it Muzza! Would be a simple tip change on a BL...

[Bakis]

Looks good if the done right, however I hear it makes the car drone like crazy, its what kept me from doing it.

I'm still undecided I like the look of either the Ti-C HKS but think dual's would be very nice but i want this noise: http://www.youtube.com/watch?v=GOlulxTXUTk

If anyone has any suggestions on how to make the MPS sound like that i'm listening

[MUZZA]

That does sound pretty hot!
Kinda like those WRC cars at the start line!

TD, I dunno if the stock rear bar has enough width.
Might require some modification.

[2XS]

You can stop the drone by using the right size pipe.

You can make it sound like the link by not running any cats or mufflers.

On the BL, you would need to run twin 2.25" (maybe 2.5")

[Bakis]

You can stop the drone by using the right size pipe.

You can make it sound like the link by not running any cats or mufflers.

On the BL, you would need to run twin 2.25" (maybe 2.5")

So basically very illegal would it be best to run a 3 inch from turbo to rear suspension then split into 2x 2.25 or 2.5 on a BK?

[A Pirate]

this is how I did it



and from a far

[duglet]

all i could see in that 2nd pic....was a ozmazdaclub.com sticker...

Happy Motoring
duglet

[Yeldarb]

Anyone seen Quad tips on a BL MPS3?

You beat me too it...been thinking of that too.

Maybe offset twins, means you may not have to cut the rear valance.

[EvilNemo]

Brad that does not look good on the car it is meant to be on let alone an MPS... Or any other car for that matter

[Yeldarb]

Well it was just an idea. Might need to try some dodgy photoshop.

[duglet]

I agree with fanta man, people buying the Lexus don't look at the rear.

It's rather ugly and wanky looking



Happy Motoring
duglet

Sent from my Olivetti typewriter

[ZedN]

+1 to that.. Those quad exhausts on Lexuses hurt my eyes.

[2XS]

So basically very illegal would it be best to run a 3 inch from turbo to rear suspension then split into 2x 2.25 or 2.5 on a BK?

Twin 2.25"

[08 mazda3 mps]

MPSI - Did yours sound similar to the one in the video? and just confirming did you do a strait pipe from the cat?

[2XS]

MPSI - Did yours sound similar to the one in the video? and just confirming did you do a strait pipe from the cat?

MPSI has not been active for quite some time.
His car was loud and droned.
The system was 3" and had a muffler placed in the stock location.
It did have a nice burble, but, any MPS with an exhaust sounds good.

[Ski82]

I too thought about this mod, mine was mainly to do with cosmetic look.
I have a 3inch system from yours truely above.....2XS.....system is awesome sounds amazing and Troy does great work.
I still think about doing this mod but once you cut your rear bar and there is no turning back, so when the drone gets to much to handle you have to pay to have it converted back to single system and you have a nasty hole in your bumper.
Don't get me wrong would look awesome but no way to tell what the drone will be like....

[MattMPS3]

Or you could just be like half the Honda and Lancer drivers out there and hang a non functional tip to fill the hole in your bumper, you know the ones I mean, one exhaust tip is covered in soot, the other looks like its just back from being chromed.

[TD]

Or you could just be like half the Honda and Lancer drivers out there and hang a non functional tip to fill the hole in your bumper, you know the ones I mean, one exhaust tip is covered in soot, the other looks like its just back from being chromed.

Got that mental picture straight away!

[NQMPS]

I just fitted the quad Exhaust onto the stock set up. Twin 2.5" per side, love the look of it and didn't need any cutting of the bumper.
The most width you can go is 160mm (Give or take) for the standard bumper.
I'll post up some pic's tomorrow.