User Tag List

Page 6 of 6 FirstFirst ... 456
Results 101 to 116 of 116

Thread: QFM High Performance Street and Track Pads!

  1. Default

    QFM HPX fitted to Mitsubishi Legnum VR4!
    Awesome pads, No dust no noise. Worked far better then my previous set of Bendix Pads. Recommend to anyone whether you drive an import or not!
    Qfm High Performance Brake Pads - Boostcruising.com

    ---------- Post added at 03:52 PM ---------- Previous post was at 03:52 PM ----------

    Quote Originally Posted by MattMPS3 View Post
    Ordered my new pads & a bottle of TRW fluid from Greg yesterday, very friendly and great service, A1RM pads for the fronts, and the HPX for the rear, arrived today so it will be a good project for the long weekend.
    Thanks Matt, good luck with it!
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  2. Default

    QFM A1RM fitted to JZA80 Supra!
    UPDATE: Took these out at Sandown... no brake fade what so ever! the pads / fluid held out really well, and was still pulling up the car after a whole day of hard braking both in the wet and dry! Totally impressed by these pads and I highly recommend them!
    SupraForums.com.AU - View Single Post - QFM High Performance Street and Track Brake Pads, including Comp9!
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  3. Default

    QFM Pads Fitted to BA Falcon!
    Hi,

    I own and drive a BA Futura 4.0L auto sedan. I was so impressed with the performance of your QFM pads on my BA Falcon I though I would drop you a email.

    Ok firstly I spoke to someone there questioning on what pads and what improvement I could expect and was told QFM pads and around 10% or so, ok that was sure a understatement.

    I had the QFM pads and new DBA slotted rotors fitted and I got to say I was very surprised the 10% improvement was wrong try 40 to 50%.

    I have found that now braking is effortless less peddle pressure is required and the actually braking action is a major improvement, when I say peddle pressure I mean before on the standard BA pad and rotors you had to apply a reasonable heavy pressure to apply the brakes where now its almost just a toe pressure to apply the same braking effort.

    Stopping from 100K’s the difference is easily 3 to 4 car lengths and as before less peddle pressure. One of the keys here as well as the stopping improvement is the requirement to use less peddle pressure this is something that the older drivers would appreciate not to mention make for safer driving.

    I feel fitting the QFM pads and DBA rotors has made my vehicle much safer to drive and given me more security in the braking department.

    K.Chapman
    North QLD
    No link available, sent via email!
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  4. Default

    QFM HPX Fitted to S13!
    If there were any doubters, I have the HPX pads on my S13 (with an R33 GTS-T hub/brake conversion) and oh my God it pulls up very fast on RDA slotteds. they can take a fair bit of abuse but if you were ever going to track the car you'd go for A1RMs.

    For the money, hard to fault!
    Fordlaser.com :: Log in
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  5. Default

    QFM A1RM Fitted to 246rwkw R33 GTST on track!
    I have used the A1RM's on my 33 for a club grip day and absolutely love it......ran Penrite sin 600 brake fluid, with HEL braided brake lines, RDA slotted rotors and A1RM's and did a solid 6 sessions and the brakes were fine all day.....was so much fun.....now time to get another set for another grip day
    Qfm High Performance Brake Pads, Including Comp 9! - Skylines Australia
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  6. Default

    QFM HPX Fitted To VX Commodore!
    I've just fitted some HPX pads to my VX Commodore (its just a daily runabout / family car) and wow, the cold bite on them is awesome and once they were warmed up wow! The abs kicks in so quickly! Very very impressed with them! Will definitely be recommending these pads to everyone I know!
    Fordlaser.com :: Log in
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  7. Default

    QFM HPX Fitted To S13 Silvia!
    Just thought I'd let you know. I have fitted my HPX pads 3 weeks or so ago and are really good, absolutely no dust on my white rims. Very impressed with product!

    Thanks again :thumbsup:

    Tim
    No link available, sent via PM on NissanSilvia.com

  8. Default

    QFM HPX Pads Fitted To VW Golf!
    I have had the HPX pads front and rear of my 97 Golf 2.0 for a month or two now and I'm a big fan. The price was one of the best I could find, who ever I spoke to at GSL was really nice and the pads themselves stop great. Way better then the supercheap ones I had before which cost more. And my wheels are staying clean much longer then they used to. Very happy customer. They also got to Sydney the day after order for next to nothing cost.
    Business QFM High Performance Street and Track Pads!
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  9. #109

    Default

    PM sent

  10. Default

    QFM HPX Fitted to VY Commodore!
    Just fitted the HPX's to the VY.. can really feel the difference! Can finally have some piece of mind when i put my foot on the brake!
    QFM Brake Pads

  11. Default

    QFM HPX wins again against the competition!
    QFM HPX vs. Bendix Ultimate

    ...Ultimates are like a set of Ferodo generic pads!

    In My Opinion - I have tried both on my VX Commodore:

    I had Bendix Ultimates and I found them to be noisy, very very dusty and it liked to eat out my rotors, they pull-up was okayish but I found they didn't have enough "bite" for my liking.

    The QFM HPX Pads - I had them fitted to new rotors as the old ones were chewed out and could not be machined further. I purchased standard rotors after the pads had been bedded in wow.. simply wow! The pull up from them was so much better, and ABS kicked in much much quicker hardly any dust and alot less noisy.

    Still some squeaks here and there but all in all, a much better improvement over the Ultimates.
    Fordlaser.com :: View topic - Brake Pad Comparison - Bendix Ultimate Vs. QFM HPX
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  12. Default

    QFM A1RM does the job in an Evo 3 Sprint car!
    Just giving these guys a good wrap, awesome service and support! Used the QFM pads on my EVO3. I have only used them for 15kms (after a quick bed in) at the Pittsworth Sprints, work great from cold, and better with slight warm up to the dummy grid. My only advise is with EVO3's with QFM's is you'll need to a bit lighter on the brake pedal as these grip up well!
    Qfm High Performance Brake Pads - Boostcruising
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  13. Default

    QFM HPX used in 2005 Subaru Forester XT
    Got my HPX's and RDA slotted rotors put in today I didn't quite realize how bad it was before!
    OzFoz.com • Login
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  14. Default

    QFM HPX Fitted to XT Forester!
    Agreed! I've just had the above combo installed yesterday [HPX pads and RDA Slotted Rotors] and the difference is unreal! Big thanks to Greg [from GSL RallySport] for the easy communication,good prices and quick postage!
    OzFoz.com • Login

  15. Default

    The Brutal Truth About A1RM!
    I use A1RM on the track/street on a heavy arse underbraked car.

    ****ing brilliant, not sure how anyone drives a car without them, come into their own in the triple digit speed range.

    brake dust is a royal mofo, but that's life i guess. a stock euro car with tuv standard pads dust just as bad and they are oem and don't stop as good.

    i hear good things about ds2500 but at double or triple the price, forget that, the a1rm will last 3 track days for me.

    not even harsh on rotors like some people toss on about, the pads are rather soft imho.
    PerformanceForums - View Single Post - Aggressive street pad for VT caliper
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  16. Default

    A1RM Pads Excel!
    I don't normally write reviews, unless they excel or end up at the other end of the scale.

    On my second set of A1RM pads now with just a 324mm rotor upgrade. Gotta say they're endurance on the track in terms of fade is exceptional. Very little fade after some heavy laps and great peddle feel all round. Not too hard on the rotors, me running out of pad at the end of the straight did a hell of a lot more damage than the pads ever did

    I did chew through them though, lasted 2 track days and the odd cruise in between. But in my opinion out performed a lot of high $$ pads in terms of feel and fade, so all in all an exceptional pad for it's cost.

    On the street they perform as a street pad should, good enough while cold. I drive like a grandma when the car is cold anyway.

    And super quick service...next day delivery from qld to sydney...and I only ordered them at like 3pm! Massive kudos to Greg!!
    The Australian 300zx Owners Association - View Single Post - QFM High Performance Street and Track Pads!
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

Page 6 of 6 FirstFirst ... 456

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •