User Tag List

Results 1 to 5 of 5

Thread: Cpe tmic

  1. #1

    Default Cpe tmic

    Hey all, does anyone here know if a cpe tmic is interchangeable between gen1/2 3's? I couldnt find anything on their website...
    Or for that matter the stock tmic?
    Cheers in advance.

  2. #2
    Join Date
    Nov 2010
    Location
    Down South
    Age
    40
    Posts
    318

    Default

    Not too familiar with the differences between the 3's but I think it needs a different shroud to fit?

  3. #3

    Default

    Quote Originally Posted by Fully6mps View Post
    Not too familiar with the differences between the 3's but I think it needs a different shroud to fit?
    Thanks for that man....I posted on the us site too and got another advising a different shroud location. Figures.....different bonnet etc. Still, how far can it be out? 20mm? Probably negligable but shyte happens. Just happened to be one on gumtree that was cheap....

  4. #4

    Default

    I think shroud placement is critical, as it determines if the air is actually forced through the intercooler, or just goes past it. Ets made several changes in shroud and core height between gen 1 and 2 so I assume cpe is similarly different.

    Sent from my Nexus 6 using Tapatalk

  5. #5
    Join Date
    Nov 2008
    Location
    North side, Vic
    Age
    37
    Posts
    6,745

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •