Not making enough boost!
So I have purchased and installed the corksport catless racepipe hpfp, sri and tip, and flashed to cobb stage2 OTS maps.
I have done some 3rd gear WOT logs which demonstrate peak boost at 14.5psi.
I did 3 3rd gear wot runs. Fun as!
http://allcarremovals.com.au/mps/3rd...%20wot%201.csv
http://allcarremovals.com.au/mps/3rd...%20wot%202.csv
http://allcarremovals.com.au/mps/3rd...%20wot%203.csv
It was disappointing after doing the supporting mods and them flashing the stage2 map to feel no improvement and see no increase in boost.
http://allcarremovals.com.au/mps/Stage2 98 v233.ptm
I ran a homemade boost pressure tester on the hot pipe connection but could not find any leaks.
I have checked all hoses and clamps in the boost circuit.
I removed the IC and, leaving the BPV on, I capped the recirc hose and pumped air in and it held 20psi indefinately.
My thought there is that the IC is intact and the BPV is not leaking.