User Tag List

Results 1 to 4 of 4

Thread: JBR solid bushes

  1. #1
    Join Date
    Apr 2014
    Location
    auckland NZ
    Posts
    173

    Default JBR solid bushes

    Hey all
    have just installed my JBR solid shifter bushings.. Drove down the drive and back and getting into forth wasn't difficult but it was a noticeable difference from the rubber bushes... My question is... Is this normal or have I over tightened the bolts on the four corners of the shift plate?

  2. #2

    Default

    Probably just less flop makes it seem stiffer. You can tweak the shifter cable tension (instructions on jbr website) to your liking, which might help.

  3. #3
    Join Date
    Apr 2010
    Location
    Canberra
    Posts
    9,459

    Default

    Weird... Mine felt less "sloppy" after install...
    Do you have a short shift plate or something else?

  4. #4
    Join Date
    Apr 2014
    Location
    auckland NZ
    Posts
    173

    Default

    its all good up in here now...i was a little premature in posting this post...driving to work this morning and giving it the beans absolutly loved the shifting feel.
    the 4th shift i mentioned must of been a combination of not used to the feel and cold tranny.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •