User Tag List

Results 1 to 10 of 10

Thread: access port HPFP reading

  1. #1
    Join Date
    Apr 2014
    Location
    auckland NZ
    Posts
    173

    Default access port HPFP reading

    hi there everyone...mid winter xmas has arrived and the accessport has arrived finally..
    i currently have installed

    autoexe tmic
    sure tip
    sure return tube
    sure aeros with K&N pod
    forge v1 BPV

    accessport map stage 1 for the above mods with 98 gas

    the HPFP internals and 1step colder plugs are being ordered at the sametime im writing this post..

    my question is: if my HPFP reading on my accessport is at 1720psi at 80% throttle then goes down
    as i ease the foot off the gas and sits at approx 1500psi at partial throttle is this
    reading normal?..

    any help would be appreciated

  2. #2

    Default

    Sounds quite normal to me, what pressure reading do you get at WOT, this one is probably the most important one

  3. #3
    Join Date
    Apr 2010
    Location
    Canberra
    Posts
    9,459

    Default

    Sounds right to me
    WOT needs to be 1600+
    And idle should be 400-450psi
    Sounds like you've installed it correctly!

  4. #4
    Join Date
    Apr 2014
    Location
    auckland NZ
    Posts
    173

    Default

    havent gone WOT yet... will give a go on the way home from work tonight at 10pm...i see 230kph before i run out of road..would be good to see if it pulls better

  5. #5

    Default

    You don't need to be at redline in 6thgear to get logs, in case you didn't know

    Sent from my HTC One X

  6. #6
    Join Date
    Apr 2014
    Location
    auckland NZ
    Posts
    173

    Default

    think im in love....this accessport pwns..will load up a datalog tonight after work to have your guys opinions on my readings

  7. #7
    Join Date
    May 2014
    Location
    Auckland, New Zealand
    Posts
    262

    Default

    Quote Originally Posted by kiwi View Post
    think im in love....this accessport pwns..will load up a datalog tonight after work to have your guys opinions on my readings
    @kiwi how did the data log go? am interested to see how this works since I'll be getting mine soon

  8. #8
    Join Date
    Apr 2014
    Location
    auckland NZ
    Posts
    173

    Default

    yea it came out good...apart from having to convert mph to kph..just have to figure out how to upload to the forum

  9. #9
    Join Date
    May 2014
    Location
    Auckland, New Zealand
    Posts
    262

    Default

    Think I saw some use google drive and post a link here

  10. Default

    You can upload them using the advanced reply.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •