User Tag List

Results 1 to 4 of 4

Thread: 3.5' Intake fitment to Corksport Battery Box

  1. #1
    Join Date
    Aug 2009
    Location
    hunter valley
    Posts
    6,403

    Default 3.5' Intake fitment to Corksport Battery Box

    Corksport battery box and 3.5' The wire harness gets in the way.... To make the Corksport battery box to fit 3.5' intake is....

    Cut the bottom of the box just extend the hole down firther in where the wire goes through.
    You will need to lift the wire harness to connect the wires to ECU. Once in and all good just pull the wire gently down
    see photos
    Many want Power not many hold it long.........

  2. #2

    Default

    Same needs to be done to fit a 3 inch JBR or HTP kit.

  3. #3
    Join Date
    Aug 2009
    Location
    hunter valley
    Posts
    6,403

    Default

    Quote Originally Posted by shaneski View Post
    Same needs to be done to fit a 3 inch JBR or HTP kit.
    I had no issue with Cpe 3' TIP.

  4. #4

    Default

    With KO4 HTP and JBR 3 inch was fine with stock battery box and ecu and didnt touch the wires with the corksport battery box, with the GTXs they move the intake system to the left by around half inch and the (i think BNRs are simialr) and the slot of the battery box had to be extended to how you did yours. C/S battery box is a god send compared to price buying smaller battery box and another battery with wires everywhere looking like crap.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •