User Tag List

Results 1 to 4 of 4

Thread: How to install Front Sway Bar MPS3

  1. #1
    Join Date
    Aug 2009
    Location
    hunter valley
    Posts
    6,403

    Default How to install Front Sway Bar MPS3

    MPS3 Sway Bar removal... Jack stands. Take the bolt out of steering column that connects to steering rack 12mm bolt near brake/clutch pedal.. sub frame 2x 22mm (21?), 2x17mm, 4x12mm, 2x14mm Sway bar 4x17mm (sub frame) 2x14mm (sway bar links). Make sure you have jack under middle of sub frame, lower subframe slowly you will need to move it away from CV's. Leave sing arms attached to sub frame (front part) they will hold it in place as you lower it. take SB out .......... Repeat putting it in.. NOTE: watch power steering hoses are not taking weight! Keep looking down for photos
    Many want Power not many hold it long.........

  2. #2
    Join Date
    Aug 2009
    Location
    hunter valley
    Posts
    6,403

    Default

    Blue 17mm sway bar, Purple 21/22mm, Yellow 12mm, Red 14mm..


    - - - Updated - - -

    14mm sway bar


    - - - Updated - - -

    17mm sub frame bolt
    Many want Power not many hold it long.........

  3. #3
    Join Date
    May 2009
    Location
    Sunshine Coast Qld
    Posts
    749

    Default

    That cant be your beast Luke!,theres no bloody dust or dirt???? BWHAHAHA.

  4. #4
    Join Date
    Aug 2009
    Location
    hunter valley
    Posts
    6,403

    Default

    No images from the net

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •