How to install Front Sway Bar MPS3
MPS3 Sway Bar removal... Jack stands. Take the bolt out of steering column that connects to steering rack 12mm bolt near brake/clutch pedal.. sub frame 2x 22mm (21?), 2x17mm, 4x12mm, 2x14mm Sway bar 4x17mm (sub frame) 2x14mm (sway bar links). Make sure you have jack under middle of sub frame, lower subframe slowly you will need to move it away from CV's. Leave sing arms attached to sub frame (front part) they will hold it in place as you lower it. take SB out .......... Repeat putting it in.. NOTE: watch power steering hoses are not taking weight! Keep looking down for photos
Many want Power not many hold it long.........