Newbie FAQ My Build Thread
From stock, to GT3071, to substantially less modded, many lessons learned!
3" HTP | 100 Cel DP | Autotech HPFP | AP V3 - Self Tuned on E20 | JBR RSB | CPE S2 REM | JBR Shifter Bushings
Newbie FAQ My Build Thread
From stock, to GT3071, to substantially less modded, many lessons learned!
3" HTP | 100 Cel DP | Autotech HPFP | AP V3 - Self Tuned on E20 | JBR RSB | CPE S2 REM | JBR Shifter Bushings
@skeetskeet
Big red text...
Yes but that is a full intake kit for the 3. Skeet has a 6 and said he got an SRI only, under the speed 6 section there is no option for a stage III intake. @skeetskeet which one did you buy/planning to buy?
He was asking about a 3" TIP and 3" SRI...
He meant 3" external diameter, because it matches up with the 3" tip and silicone joiner he brought off me. I have asked him to measure the inside diameter just to be sure (s word)
hahah s word -
ok " corksport power series intake system CARB EO #d-683 ... cant tell the internal diameter
close to 65mm internal diameter ..
65 millimetres =
2.55905512 inches
looks like this one http://www.corksport.com/corksport-stage-ii-power-series-short-ram-intake-for-mazdaspeed-6.html
even has that little 2 inch TIP
Last edited by skeetskeet; 24-09-2014 at 09:28 AM.
You have a Stage II intake. You are ok to run this without a tune.