User Tag List

Results 1 to 9 of 9

Thread: CP-E TMIC installation instructions

  1. Default CP-E TMIC installation instructions

    Hello,

    Does anyone know where I can find a copy of the installation instructions for the CP-E TMIC for the Mazda 3 MPS 2012. Nothing on the CPe website...

    Thanks
    mps3er

  2. #2

    Default CP-E TMIC installation instructions

    1. Undo 3 bolts holding TMIC on head of motor
    2. Undo boost tube clamps on hot and cold side of intercooler
    3. Undo BPV bolts and move aside (dont loose gasket)
    4. Yank the stock TMIC intercooler off
    5. Unbolt cold pipe and swap to CPe TMIC (don't forget gasket)
    6. Ease the newly assembled CPe TMIC in position like an old man into a warm bath
    7. Put back and tighten everything you took off in earlier steps
    8. Win
    Last edited by Rayd; 19-10-2013 at 03:51 PM.

  3. Default

    where do those brackets that come with the core go ? lol

    i'm sure i'll figure it out once new one's on there, but you know...better knowing it now i guess..

  4. #4
    Join Date
    Aug 2011
    Location
    Sydney North
    Posts
    441

    Default

    When I did mine I couldn't figure it out either. So I googled a picture of a TMIC and there is heaps of pictures already with the brackets on so you know when to put them.
    Honestly once I saw where they went I couldn't figure out why I couldn't figure it out in the first place...
    Just look and align things..

  5. #5
    Join Date
    Apr 2010
    Location
    Canberra
    Posts
    9,459

    Default

    corksport has instructions if you need them...
    not much difference between the 2

  6. #6
    Join Date
    Oct 2009
    Location
    Moorooka, Brisbane
    Age
    48
    Posts
    7,059

    Default

    Not sure if this helps...



















    Sent from my GT-N7105 using Tapatalk 2
    Redbull is DEAD!!

    Long live the Redbull ... V2



  7. Default

    ah thanks. this is def helpful. i'll try use these tmw

  8. #8

    Default

    with the cp-e the included brackets should be test fitted before being tightened (obviously) as its not like most that come pre-attached

  9. Default

    haven't gone around to installing these yet, but i did manage to get hold of the CP-E TMIC instructions...
    @Yeldarb - are those pics for the gen 1? the instructions seems to say the shroud won't be utilised for a gen 2 install...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •