User Tag List

Results 1 to 3 of 3

Thread: MZR Motor Build Kits

  1. Default MZR Motor Build Kits

    MZR Motor Build Kit

    With all the motor builds that have been going on lately we decided to put a few motor build kits together for you guys. One of the most difficult parts to building your motor is figuring out what all OEM parts you need to get to go with your rods and pistons. So with the MZR Motor Build Kit, we make it easy for you by putting them all together where they can be purchased with the click of one button. There are three kits to choose from depending on what all you need or want to do with your build.

    The Stage 1 kit includes the following.

    • Rod Bearings
    • Main Bearings
    • Thrust Bearing
    • Rear Main Seal
    • Gasket Set
    • Crank Pully Bolt
    • Friction Washers x3
    • Flywheel Bolts x6




    You get to choose between OEM, Clevite AL, and Clevite H series (trimetal) bearings, and you can add a Cometic Head gasket if you want. This kit includes the essentials for a bare minimum motor build.

    The Stage 2 Kit includes the following.

    • Rod Bearings
    • Main Bearings
    • Thrust Bearing
    • Rear Main Seal
    • Gasket Set
    • Crank Pully Bolt
    • Friction Washers x3
    • Flywheel Bolts x6
    • Timing Chain
    • Chain Guide
    • Tensioner Guide
    • Chain Tensioner



    It builds on the stage 1 kit while adding a few more parts that are advisable to replace at the time of your motor build. The Stage 2 kit will also give you the option to add the OEM VVT, cam bolt, and cam washer for a VVT replacement.

    The Stage 3 Kit includes the following.

    • Rod Bearings
    • Main Bearings
    • Thrust Bearing
    • Rear Main Seal
    • Gasket Set
    • Crank Pully Bolt
    • Friction Washers x3
    • Flywheel Bolts x6
    • Timing Chain
    • Chain Guide
    • Tensioner Guide
    • Chain Tensioner
    • Oil Pump
    • Oil Pump Gear
    • Oil Pump Chain
    • Oil Pump Chain Tensioner



    Again, it builds on the Stage 1 and 2 kits and adds all of the Oil Pump assembly. It is wise to replace higher mileage oil pumps as well as any oil pump that has been subject to a blown motor or even a spun bearing as any metal shavings that get picked up can ruin your new motor.

    The Stage 1 MZR Motor Build Kit is $742.38
    The Stage 2 MZR Motor Build Kit is $919.21
    The Stage 3 MZR Motor Build Kit is $1215.92

    All three stages will vary in price depending on which bearing options you go with as well the other options that are available for you to add.

    The OZMPS3 coupon code applies to this so feel free to use it anytime you want

    Bonus:

    We also created a VVT Replacement Kit for you guys! It comes with all the parts necessary to replace your VVT.



    MZR VVT Replacement Kit MS3 / MS6 2006 to 2013 is $398.38

  2. #2
    Join Date
    Feb 2012
    Location
    Wollongong
    Posts
    846

    Default

    Legen wait for it....... dary.

    Sent from my GT-I9300 using Tapatalk 2

  3. Default

    And just so you guys under stand, the following is the difference between the 2006-2011 gasket set and the 2012 + gasket set. You can choose which ever you want for which ever year you have, the 2012+ just comes with a few extra items listed below.

    Gasket kit listed for 2006-2011 Year Models MS3 includes:
    - Exhaust Valve Seals (8)
    - Intake Valve Seals (8)
    - HPFP Cam Housing Gasket (to head)
    - PCV Gasket
    - Valve Cover Gasket
    - Head Gasket
    - Front Oil Seal
    - Intake Manifold Gasket (to head)
    - Fuel Injector O-Ring (on top side of injector)
    - Exhaust Manifold Gasket (to head)
    - Oil Pump Pickup Tube O-Ring
    - Oil Drain Tube Inlet Gasket (turbo)
    - Oil Drain Tube Outlet Gasket (turbo)
    - Oil Filter Housing Gasket (to block)
    - Water Pump Gasket (internal)
    - Water Pump Gasket (to inlet)
    - Water Pump Gasket (to outlet)
    - EGR Gasket

    The 2012-2013 Gasket Kit comes with all those parts PLUS:
    - O-Rings for fuel rail hard feed line (3)
    - Grommets for fuel injectors (4 per injector)
    - Gasket for turbo inlet (manifold to turbo)
    - Gasket for turbo outlet (turbo to downpipe)
    - Gaskets for oil feed line (4, to turbo)
    - Gaskets for water feed and drain lines (4, to turbo)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •