I know a few years ago, ADR compliant braided brake lines were required. I've been reading online and it seems that people are stating that the ADR has changed in this area. I've quoted the design rule which was obtained at Vehicle Standard (Australian Design Rule 42/04 - General Safety Requirements) 2005
15. BRAKE TUBING AND BRAKE HOSE
Flexible hydraulic brake hoses, air or vacuum brake tubing and air and vacuum hose, flexible and hydraulic power hose between the ‘Brake Power Unit 31/00’ or ‘Brake Power Unit 35/00’ and the master cylinder or its equivalent must conform to SAA, SAE, BS, JIS, DIN, ISO or ECE Standards, or FMVSS 106 Brake Hoses, specified for flexible brake hoses, air brake tubing or hose or vacuum brake tubing or hose or hydraulic power tubing or hose and be fitted to the vehicle as to prevent chafing, kinking or other mechanical damage under normal motion of the parts to which they are attached.
So basically does that mean that provided the braided line meets one of the international standards mentioned above, it will be ADR compliant?