How do we order?
Part number for 4 pot front caliper?
Part number for brake pad to suit?
Shipping costs?
How do we order?
Part number for 4 pot front caliper?
Part number for brake pad to suit?
Shipping costs?
No fitment guide yet, but I feel like the 6pot BBK should fit with 17" wheels no problem. They are just barely to big for the 16" wheels we have our slicks mounted on and a half inch of clearance would be more than enough for them to fit. I will still try to come up with some kind of solid fitment guide though.
--> 2008 Metro Grey Sports Pack Gen1 <--
CS SRI ll CS TIP ll CS AB ll 2XS SSP ll 2XS FMIC ll SURE Anchors ll Enkei RPF1's 17x9 +45 ll Lamin-X Fog Tint ll DBA T3 4000 series ll Remsa pads ll Braided lines
CP-E S2 RMM ll Hankook RS3 235/40/17 ll Forge V1 BPV ll Whiteline RSB ll AutoTech HPFP ll Spin-on Conversion ll Rear Diffuser
DGR Coilovers ll LED Replacement lights ll "08-MPS" plates ll Cobb AP V3 (E85) ll CP-e TBE ll OCC
@EdgeAutosport.com any chance you would be able to tell us which model number calipers are being used so I can check what the piston sizes are? Mainly to see if the braking bias will change
@EdgeAutosport.com Also are the braided lines certified to some sort of safety standard and will there be an option to add rear braided lines?
Last edited by lup15; 27-08-2013 at 03:04 PM.
I'm not sure on the safety standard, but I'm sure they are as Wilwood would probably not sell them if they didn't.
The caliper kits come with the lines because the factory lines do not fit with the upgraded calipers and likewise, the upgraded lines won't fit with the factory calipers.
thanks for the response. I only ask as it is illegal to run aftermarket braided lines in Aus unless they meet certain standards. It's good to know that Wilwood make the lines and I'm sure as you have said, that they would be of exceptional quality. Do you think you could check with them if they meet US DOT FMVSS 106 standard?
also I was seeing if you would be able to offer an option to purchase rear braided lines to replace the factory ones, on top of what is provided in the kit. basically so that we can have braided lines all round
if not plenty of mobs in australia that can make approved ones for fronts and rears.
Wilwood 13" BBK Front MPS 3
Wilwood 4 Piston Caliper Kit Front MPS 3
Wilwood 4 Piston Caliper Kit Rear MPS 3
Wilwood 6 Piston Caliper Kit Front MPS 3
MPS 6 Brake kits will be coming soon
I'll check and get back with you.
ADR are iffy on brake lines... And most parts that make your car fun/better the drive.
Just to let you guys know, shipping on these kits will be between $150 and $200 depending on where you are located.
Still no MPS 6 love?
http://www.ozmpsclub.com/forum/handl...-template.html Search function peps
--> 2008 Metro Grey Sports Pack Gen1 <--
CS SRI ll CS TIP ll CS AB ll 2XS SSP ll 2XS FMIC ll SURE Anchors ll Enkei RPF1's 17x9 +45 ll Lamin-X Fog Tint ll DBA T3 4000 series ll Remsa pads ll Braided lines
CP-E S2 RMM ll Hankook RS3 235/40/17 ll Forge V1 BPV ll Whiteline RSB ll AutoTech HPFP ll Spin-on Conversion ll Rear Diffuser
DGR Coilovers ll LED Replacement lights ll "08-MPS" plates ll Cobb AP V3 (E85) ll CP-e TBE ll OCC