User Tag List

Results 1 to 5 of 5

Thread: oil pressure gauge

  1. #1
    Join Date
    May 2013
    Location
    Canberra
    Age
    30
    Posts
    44

    Default oil pressure gauge

    Hi guys,

    I have just got an oil pressure gauge installed in my 05 mazaspeed 6 and I am having trouble tapping into an oil source. Just wondering if anyone has had the same problem or has any ideas on ways to get around it.

    Cheers

  2. #2

    Default

    Easiest way would be spin on filter conversion

  3. #3
    Join Date
    Jun 2009
    Location
    Newcastle
    Posts
    1,413

    Default

    Get some fittings from SpeedFlow, extend from where the oem oil pressure sensor is fitted.

  4. #4
    Join Date
    Jun 2009
    Location
    Newcastle
    Posts
    1,413

    Default

    Speedflow Australia - Adapters

    I think the OEM sensor is 1/8 npt, you could use female-male extension #372-02-BLK with female tee male on the run #916-02-BLK , that will give you a port for your OEM and gauge.
    Last edited by MPS2NV; 06-08-2013 at 07:35 PM.
    Every man should have a V8 ute.....with a Chev badge.....and a Southern Cross sticker! Mods? What mods?

  5. #5

    Default

    If you get a spin on conversion I got a sandwich adaptor plate i'm not using here if you're interested.
    Goes just before the filter and you just screw the sensor into it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •