Hi guys,
I have just got an oil pressure gauge installed in my 05 mazaspeed 6 and I am having trouble tapping into an oil source. Just wondering if anyone has had the same problem or has any ideas on ways to get around it.
Cheers
Hi guys,
I have just got an oil pressure gauge installed in my 05 mazaspeed 6 and I am having trouble tapping into an oil source. Just wondering if anyone has had the same problem or has any ideas on ways to get around it.
Cheers
Easiest way would be spin on filter conversion
Get some fittings from SpeedFlow, extend from where the oem oil pressure sensor is fitted.
Speedflow Australia - Adapters
I think the OEM sensor is 1/8 npt, you could use female-male extension #372-02-BLK with female tee male on the run #916-02-BLK , that will give you a port for your OEM and gauge.
Last edited by MPS2NV; 06-08-2013 at 07:35 PM.
Every man should have a V8 ute.....with a Chev badge.....and a Southern Cross sticker! Mods? What mods?
If you get a spin on conversion I got a sandwich adaptor plate i'm not using here if you're interested.
Goes just before the filter and you just screw the sensor into it.