Eonon D5151A Replacement Head Unit

[nath]

So for those running an aftermarket Sub+Amp that's probably a viable solution? The loom/plug that you bought, much wiring needed or is it fairly "plug and play" ?

Thanks Nath!

Would be a viable solution if your using the RCA's from the HU.

The loom just requires the top and corresponding bottom wire to be connected together, counting back once you figure out which pin goes to which. If you can solder then your 3/4 of the way there. I used the wiring off the mazda3forum, and noted that there is a pin which does nothing on the incoming loom, so with the PAC loom you just need to count 1 more across (sounds confusing but makes sense when you look at socket).

So not really plug and play, but not a great deal of effort if you can solder. I'd recommend not doing the dodgy and twisting and taping the wires.

[bodyboardingbum]

Sounds good, thanks for the reply @nath !
Can solder no problems, and the amp i am running does use RCA so that works too. Will order the loom

[GibbA]

Sounds good, thanks for the reply @nath !
Can solder no problems, and the amp i am running does use RCA so that works too. Will order the loom

Pics please when you do so!
better volume control, works with aftermarket sub + amp, I'm sold!

Will be buying this when funds permit

[nath]

No problems. Took a few weeks to come from the states.

Here is a few photos of the back of the factory loom. Top row is the wiring which goes to the speakers, bottom row is the wiring from the HU to the amp, in the first 2 photos.

As you can see on the bottom left, the first is empty, then the next is the remote turn on, as per the list on the mazda3forums. There are some colour differences described for the bottom row, so I counted from left to right and matched up the wires. Tested the audio to each speaker successfully, so the wiring position is the same, just different colours. I've adjusted the colours in the list below from mazda3forums.

When you get the new loom, the male end of the loom, solid back wire will line up with the grey w/red stripe wire.

TOP - In order from left to right. These are the speaker outputs
grey w/ red stripe (FR-)
white w/ red stripe (FR+)
grey w/ black stripe (FL-)
white w/ black stripe (FL+)
solid grey (BR-)
solid white (BR+)
grey w/ white stripe (BL-)
white w/ purple stripe (BL+)


BOTTOM - In order from left to right. These are the inputs to the amp
solid blue (remote turn on)
solid purple (FL+) - Solid Red AUS
green w/ white paint (FL-) Solid Dark Green AUS
solid red (FR+) Solid Purple AUS
solid green (FR-) Solid Light Green AUS
brown w/ blue stripe (BL+) yellow w/ green stripe AUS
yellow w/ blue stripe (BL-) white w/ blue stripe AUS
yellow w/ green stripe (BR+) black w/blue stripe AUS
white w/ blue stripe (BR-) yellow w/ blue stripe AUS

[bodyboardingbum]

Nooooooooooooooooo! The loom is now discontinued... i swear it wasn't when i looked yesterday >.<

[GibbA]

Yeah it definitely didn't say that yesterday... :/ That's inconvenient timing if ever there was some! (to put it politely..)

[nath]

Try ebay? I got mine off ebay, not their site.

[bodyboardingbum]

Try ebay? I got mine off ebay, not their site.

Any chance you can share the link for yours? Couldn't seem to find on eBay, or anywhere else for that matter.
Appreciated!

[GibbA]

Yeah I've found a couple on american eBay, but the listings have ended and not been relisted.
The company Sonic Electronix was one eBay store selling them that no longer does (not surprising)

edit;

Not on Amazon either :/

[nath]

PAC ADD GM24A ADDGM24A Harness TO ADD Replace Factory GM Bose Amplifiers | eBay was mine.

I wouldn't be sure where you would start looking to see where you could get the male plug from.

[willmazda]

Hey Guys

I am just wondering if anyone has an idea where i could get the lcd screen from a series 2 mazda 3 as i have the rang my local wreckers and no one will sell it to me and the best i can get is the whole stereo for 150 and i am not paying that for just the lcd.

Cheers Will

[mech81]

That may be the only way - have u checked Mazda stealers to see if they could sell u just the LCD? May be as much as the wreckers quoted u for the stereo

[OzMPS747]

Does this Unit Support The BOSE sound system MPS 08 with BOSE.


Seems like no Manufacturers make these units compatible Why 80% of MPS have BOSE.

Anyone have any suggestions , really would like to put one in.
Can a Audio Place Be able to hook one up with no issues

[bodyboardingbum]

Does this Unit Support The BOSE sound system MPS 08 with BOSE.

Yes, read through the previous pages and there's discussion and mention of the few issues you'll encounter.

I have BOSE audio and am running the D5151.

[OzMPS747]

Thank you for the info.
Ill try and source a unit then any particular site or ebay.

Also ill get someone that does car audio to install it so shouldnt have problems then i hope

[swell]

Hi guys. Eonon have just released a new version that has screen mirroring capabilities.
http://www.eonon.com/Car-DVD-Players...da/GM5151.html
It would look pretty cool running the torque app for android.

Sent from my GT-N7105 using Tapatalk

[swell]

Eonon have just released the GM5151 with a phone screen mirroring function.
It would be pretty cool having the torque app running on the screen from your android phone.

Sent from my GT-N7105 using Tapatalk

[GibbA]

Eonon have just released the GM5151 with a phone screen mirroring function.
It would be pretty cool having the torque app running on the screen from your android phone.

Sent from my GT-N7105 using Tapatalk

Yes!! Glad I waited, so getting this now. THANKYOU!
can run phone gps through screen too

Sent from my Nexus 5 using Tapatalk

[mech81]

Oh wow!! Phone mirroring- now I want to replace my eonon despite it only being 6 months old

[sargie]

Oh wow!! Phone mirroring- now I want to replace my eonon despite it only being 6 months old

Yeah me too!!