Hey guys was wondering what gear knobs fit straight onto the 6 ? Thanks
Hey guys was wondering what gear knobs fit straight onto the 6 ? Thanks
I recommend the spherical jbr heavy knob, makes shifts much easier
6 Spd Reverse Upper Left : James Barone Racing, Custom Fabrication
Otherwise, any knob that will fit thread pitch 10x1.25
Mazda6 MPS
BNR STAGE 1 - COBB ACCESSPORT STAGE 2 - CP-e HIGH PRESSURE FUEL PUMP - CP-E DOWNPIPE - 3" MAGNAFLOW ZORST - DENSO ITV22 SPARK PLUGS - COBB SF INTAKE - COBB TURBO INLET PIPE - JBR 70a TRILOGY MOUNTS - SURE ANCHORS - SURE COUNTERWEIGHT - 2XS SHORT SHIFT PLATE - 2XS STEALTH BLOW OFF VALVE - KING PERFORMANCE LOWERED SPRINGS - BILSTEIN B8 SHOCKS - WHITELINE REAR SWAY BAR - DBA 4000 CROSS DRILLED ROTORS - HAWK PERFORMANCE HPS BRAKE PADS
Sure motorsport knobs screw straight on. I have one installed on my car.
Any of the "universal" ones with a M10 1.25 thread will screw right on (how flush they fit with the top of the shifter boot will vary).
As mentioned their are several vendors that make them for our cars, but they are not always the cheapest.
Most of the universal ones on ebay are for honda's (M10 1.5) so you will need to re-thread them with a helicoil prior to install (if you have one lying around it takes about 5 minutes to do).