Oil Catch can JBR expressions of interest

[Oldhead]

Please register interest in JBR oil catch can with non return valve.
After heaps of investigation ,determining manufacture, Design,material,feedback and dia of inlet,outlet ,baffles etc i have reached the conclusion that the JBR would suit my MPS most of all.
I have looked at Greddy ,Corksport, Cusco ,Calibre ,Mitsumi and heaps of cheap units and all have inherent weaknesses.
Currently awaiting confirmation from USA as to group buy and freight costs.James Barone Racing
These units are expensive BUT, everything is supplied , S/S painted black , 5/8 inlet&outlet seperated high /low so as gasses/oil contaminates must pass through several filters before re entering system,and the only cans with 1/2 brass non return valve Etc etc .
These tanks are designed by 43 Draft Design USA and are supplied for DI turbo VW and Audi which amongst others suffer from the dreaded NO fuel to pass via valves and intake manifolds , hence they get coated in gunk and rob your engine of performance ,loss of power , Turbo spool time, poor fuel consumption etc.
Register interest and i will compile and post updates .

Oldhead
Dices
Unsetledhawk
Lachlan
CamoW
Redjinn
Fizzy
Mech81

UPDATE. 12/03/2012
JBR has not responded to my previous 2 emails (very unusual ) so here goes JBR vers 2 site price is $215.00 +$60.00 freight Total of $275.00 .

Today i have been in contact with the original manufacturer of the cans . 43 Draft Design and they are coming back to me with a buy price !!!!

To save freight the orders will be less the rubber hose (which we can all get almost anywhere here)and No check valve .

This is my request to John Pelman,separate orders inc freight ,
Stealth S/S OCC either brushed finish or wrinkle black (customers pref)(1)
Catch can quick drain kit (1)
3/4 in S/S hose clamps (4)
PVC 90deg elbows (2)
Current list prices for above order are Total $160.00 plus freight .
Lets see what discounts i acheive for our business ,at least these guys replied!!!!!
I am also searching for a suitable automotive check valve ,which should be cheap enough here in australia after all its only a check valve with a low crack pressure!!!!!

Update 13/03/2013 12.09am
Plan fell over ,read my last post .

[Dices]

Hey mate, register me as interested.
What made you rule out the corksport can?

[Rayd]

Hey mate, register me as interested.
What made you rule out the corksport can?

the CS one is held together by glue and has been known to explode itself apart lol

[Oldhead]

As above reply,ha Ha Ha and the fact that both inlet and outlet are above filter screen,as per corksport diagram . The JBR connects directly to PCV valve from crankcase and intake manifold not the breather tube on the rocker cover .

Also the fact that JBR has large inlet and outlet and has a non return valve ,the OEM PCV valve is know to leak ,not close fully ,hence the shit acumulated in manifold ,and around valves and seats.
Im also running 18PSI from turbo = more pressure ,blow by to crankcase.
Hope this helps Dices.

[UnsettledHawk]

Definitely keen. Which one were you going for - check valve or no check valve?

Also, when do you see the GB closing? I was about to order one and a few other things from JBR last night, so I may go alone depending on timelines.

[Lachlan]

I'm keen. Thanks for doing the research for us
This is the stage 2 right?

Sent from my ASUS Transformer Pad TF700T using Tapatalk HD

[CamoW]

Def keen...

Sent from my HTC Velocity 4G using Tapatalk 2

[Oldhead]

Definitely keen. Which one were you going for - check valve or no check valve?

Also, when do you see the GB closing? I was about to order one and a few other things from JBR last night, so I may go alone depending on timelines.

Just waiting for Jamie to confirm group buy prices.

[Oldhead]

Stage 2 is correct Lachlan

[Fizzy]

Keen depending on prices.

[mech81]

Would be keen as well. As per Lachlan, this is the stage 2 you are talking about? Stupid question - this is compatible with the Gen 1 3MPS engines?

[3MPSPWR]

Ahhh fk... just bought this like 2 weeks ago... Fail whale...

[slixx]

I bought my Sure OCC about a month ago before I read all the sagas

I haven't read any bad reports about the Oil Rig, but it does have a screw top

Already spent the money now and no chance of selling off

Never mind


Peter "SLIXX"

[JapCrap]

I have the ssp oil catch can. Better can Imo but its not well equipped

Got rice bitch?!?

[RedDjinn]

Keen

[KFuNk]

Just bought the revised version of the CosrkSport one, no glue and all welded up.

[Oldhead]

Would be keen as well. As per Lachlan, this is the stage 2 you are talking about? Stupid question - this is compatible with the Gen 1 3MPS engines?

I will double check with JBR ,but it should fit perfectly ,i will confirm first.

[Oldhead]

Just bought the revised version of the CosrkSport one, no glue and all welded up.

Good to hear Ken, dont want it to explode like previous ones EH.

[Oldhead]

Thanks for interest guys , Jamie has still not got back with details ATM. I will continue to update my original post with names etc and confirmed price as available .Cheers.

[KFuNk]

Good to hear Ken, dont want it to explode like previous ones EH.

Yeah they are all good now. Off topic but you coming for some QR action next month? Haven't seen you in awhile