Just on the Hypertech, heard mixed reports that it's only recommended with the stock turbo?
Current mods:
CP-e DP
Turbosmart BOV
BNR Stage 1
CS TIP
Hypertech for me or nah?
Just on the Hypertech, heard mixed reports that it's only recommended with the stock turbo?
Current mods:
CP-e DP
Turbosmart BOV
BNR Stage 1
CS TIP
Hypertech for me or nah?
Would not advise on BNR.. Should be custom tuned not OTS map
You should look into it a bit more TBH, the Hypertech is a generic tune for minimal mods.
The AP is a tuning device that happens to also have generic maps to suit most basic mods included with it. With a BNR I would recommend a custom tune of some type.
Check the stickies in this section - particularly - http://www.ozmpsclub.com/forum/ecu-m...solutions.html
MY16 WRX STi Crystal White Pearl
-= Rally Armour Flaps - 2XS Muffler Delete =-
FG FPV F6 MKII Vixen - SOLD
-= Bluepower SRI - ID1000 Injectors - Venom Cat - XCAL3 - ProcessWest Stg2 Intercooler - 359 RWKW=-
CX9 Grand Touring Stormy Blue
-= The rolling armchair =-
6 MPS Velocity Red - SOLD
-=Cat Back Exhaust - Pirelli PZero=-
3 MPS Aurora Blue - SOLD
-=PG SRI - PG Inlet - ETS TMIC - GFB Hybrid BOV - Best Mufflers DP - Eibach Pro - AccessPort STG2 - Autotech HPFP - ITV22 - Michelin PSS=-
My Mate bought a Hypertech for his 6mps and it didn't do anything, confirmed with a dyno and a Dashhawk.
Seriously? i would get my money back then??
I doubt that.. Post up some logs and Dyno graphs.
Maybe he is doing it wrong. Or maybe he does not have an intake. It definitely :works: I used to run one and there is one on the missus 6 MPS.
I had a dyno run and dash hawk logs to verify also. The graphs went with the car but the others at the Tunehouse dyno day will confirm.
Sent from my Nexus 4 using Tapatalk 2
MY16 WRX STi Crystal White Pearl
-= Rally Armour Flaps - 2XS Muffler Delete =-
FG FPV F6 MKII Vixen - SOLD
-= Bluepower SRI - ID1000 Injectors - Venom Cat - XCAL3 - ProcessWest Stg2 Intercooler - 359 RWKW=-
CX9 Grand Touring Stormy Blue
-= The rolling armchair =-
6 MPS Velocity Red - SOLD
-=Cat Back Exhaust - Pirelli PZero=-
3 MPS Aurora Blue - SOLD
-=PG SRI - PG Inlet - ETS TMIC - GFB Hybrid BOV - Best Mufflers DP - Eibach Pro - AccessPort STG2 - Autotech HPFP - ITV22 - Michelin PSS=-
Last edited by Jmac; 13-04-2013 at 10:59 AM.
MY16 WRX STi Crystal White Pearl
-= Rally Armour Flaps - 2XS Muffler Delete =-
FG FPV F6 MKII Vixen - SOLD
-= Bluepower SRI - ID1000 Injectors - Venom Cat - XCAL3 - ProcessWest Stg2 Intercooler - 359 RWKW=-
CX9 Grand Touring Stormy Blue
-= The rolling armchair =-
6 MPS Velocity Red - SOLD
-=Cat Back Exhaust - Pirelli PZero=-
3 MPS Aurora Blue - SOLD
-=PG SRI - PG Inlet - ETS TMIC - GFB Hybrid BOV - Best Mufflers DP - Eibach Pro - AccessPort STG2 - Autotech HPFP - ITV22 - Michelin PSS=-
Did he re flash over the top or flash to stock and then flash back?
I'd contact hypertech for support they should he able to help.
Sent from my Nexus 4 using Tapatalk 2
He flashed back to stock, then Flashed back.Its very strange because when he loaded the tunes the unit swigs everything was sucessful
Does he have an intake? What map is he using?
Sent from my Nexus 4 using Tapatalk 2
He has Corkdport SRI and he loaded what SRI, TIP into unit.On the computer it gave 3 options to download he down loaded the AUS version to the unit.When he hooked up unit to car it doesn't give many options, I think there was remove 0-60 ,idle, rev limit, Mods and that's it.Does that sound right?
Yeah That's all normal.. If he used the software cd there might be newer software on the site. Else contact hypertech and they should be able to help.
http://www.hypertech-inc.com
Sent from my Nexus 4 using Tapatalk 2