16s wont fit the fronts but will fit the rears.
16s wont fit the fronts but will fit the rears.
From MSF...
Wedssport SA-15r 18x9.5 +23
Sent from Samsung Note 2 LTE
with like like -10 deg of camber...
Even if you made them fit it would look retarded and terrible.
Not sure if it's been asked but would xxr 527 in 18x8.75 +35 fit on a lowered mps3? I have a strong feeling they'll scrub badly if they do fit.
Sent from my C6603 using Tapatalk 4
Will fit with a stretched tire, rolled (not flared) guards and coilovers+camber arms.
Will fit stock height, but look like a tractor.
I see, not really the look I'm after, shame they aren't available in a thinner width.
Perhaps see if they have different offset? +45 will fit easily... (Although soft fitment! Haha)
From MSF...
Work CR-KAI 18x9.5 +30
Sent from Samsung Note 2 LTE
Hi guys,
Any & All Help would be great.
MPS Model: 6MPS
Wheel Brand: Nissan 350z
Wheel size
- Diameter: 18'
- Width: 8'
- Offset: +30
Tyre size
- Diameter: 18'
- Width: 225
- Aspect(height): 40
Will you be Rolling the Guard's (Yes/No): No
Wanted Ride Height (When compared to standard): Stock
Will you be running Coilovers (Yes/No): No
Will you have Adjustable endlinks (Yes/No): No
Will you be running SPC ball joints (Yes/No): No
What degree camber will you be likely to running: Stock
This is will look similar to what @MadAussie used to run... A little overhang lol
Sent from Samsung Note 2 LTE
Yeah cool...
that is a bit Aggy for me i will keep looking...
Cheers @Yeldarb
350Z Track wheels are what you would want, they're a big more aggressive than the normal Z rims.. and they would look good
Now fellas, I'd been researching for a long while now, on different combinations of widths, offsets, wheels etc... and I've come around to one choice that's available to me here in WA but I just wanted to see if maybe anyone in Oz has had experience with a similar setup, y'know, to make quadruple sure it would work!
MPS Model: 3 Gen 2
Wheel Brand: Rota DPTs
Wheel size
- Diameter: 17
- Width: 9
- Offset: +35
Tyre size
- Diameter: 17
- Width: 255
- Aspect(height): 40
Current wheels are stock so I want a change, and I'm still running stock suspension, planning on grabbing these and trying/fitting them before investing in coilovers. I'm wrapping them in Hankook Ventus V12 in 255/40, dropping down to 17". Will they fit? Many people have run these dimensions, with some variation, over in the States from what I've read but most are already lowered, cambered etc. I suspect this offset may look ridiculous on stock shocks!
METAL, MOSHING, & MPS MAYHEM
|JBR Stage 2 SRI | Turbosmart Kompact BPV | Ultimate Racing resonated CBE | CS SSP @ 35%; exhaust hanger bushings | Rota DPT "Fighter" matte black 18x8.5 +44 | Hankook Ventus V12 Evo 245/35-series | ScanTool OBDLink LX | TWM "Big Type R" 600gr shift knob | MANY MORE INSTALLS TO COME...
Will they fit? Well the front does...
Rota PWR-FA (Kandy Blue)
18x8.5 +44
235/40/18 Goodyear Eagle F1 Asymmetric 2.
BK MPS
Sent from my One using Tapatalk
Agreed! You'll struggle with a 255, unless you're pulling/flaring guards... A lot!
For reference, I'm running 9" +30 with a 215/40 and it barely fits with rolled guards. @zkowski I'm also in Perth so you're welcome to check mine out before you purchase - so you know what you're getting yourself into!
BK MPS3 Sports - Work Meister S1RCP-e Catalogue. JDM Goodies.