Oh hai guys
Just wanting to pick people's brains here, what's the fitting size for the brake line banjo on the stock calipers in our 6's?
It looks like an M8/M10 to me, but I'd like to see if someone can tell me exactly before I crack it off and get lines sorted.
And for anyone who's wondering about the progress of my conversion, you'll all laugh when I do the final thread. Bolt spacing between EVO 8MR calipers and stock is less than half a mm, the rotor offset is about 1mm off... Evo 8MR 4-pots are almost a direct bolt-on conversion....
---------- Post added at 04:10 PM ---------- Previous post was at 03:03 PM ----------
I've found the guy in the workshop manual, but doesn't tell me the detals of it... Anyone have any insight on it?