User Tag List

Results 1 to 1 of 1

Thread: MPS6 Front Caliper Banjo Bolt

  1. #1

    Default MPS6 Front Caliper Banjo Bolt

    Oh hai guys

    Just wanting to pick people's brains here, what's the fitting size for the brake line banjo on the stock calipers in our 6's?

    It looks like an M8/M10 to me, but I'd like to see if someone can tell me exactly before I crack it off and get lines sorted.


    And for anyone who's wondering about the progress of my conversion, you'll all laugh when I do the final thread. Bolt spacing between EVO 8MR calipers and stock is less than half a mm, the rotor offset is about 1mm off... Evo 8MR 4-pots are almost a direct bolt-on conversion....



    ---------- Post added at 04:10 PM ---------- Previous post was at 03:03 PM ----------



    I've found the guy in the workshop manual, but doesn't tell me the detals of it... Anyone have any insight on it?
    Last edited by MadAussie; 16-04-2012 at 05:52 PM.
    MPS6

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •