User Tag List

Results 1 to 20 of 20

Thread: 19x10s on a mps 3

  1. Default 19x10s on a mps 3

    Will 19x10s fit on a mazda 3 mps rear?


    ---
    I am here: http://tapatalk.com/map.php?wvf5db

  2. #2
    Join Date
    May 2010
    Location
    Brisbane
    Age
    41
    Posts
    690

    Default

    WOW 19x10's thats ambitious to say the least.
    I have never heard of something the wide on a 3 before, most I have heard of is 8.5 and they have had to roll guards and still get scrubbing depending on overall height.
    Im going to say straight out no, but somebody correct me if I am wrong.

  3. #3
    Join Date
    Sep 2011
    Location
    Prospect (Sydney)
    Posts
    381

    Default

    nothings impossible. If you want to tuck them then there needs to be shaving (more like removal) inner guards, rolling guards and pumping them. Big money with pumping guards properly, or just do the baseball bat trick which is ghetto as ****. Poking them would be an easier(ish) option, but still needing pretty much the same list as tucking and the car will sit higher.
    And this also depends on how much room is actually available in the guard, tubbing them may be a final option and seriously not worth it.

    For bragging right of having them on the car its not worth the trouble or money.

    I had 20x8.5 on my old SP23 dropped on coil overs (tucking rim) and didnt have any drama with scrubbing. Whiteminx, memeber on here had 9's on hers

    Oh and its not the rears you have to worry about so much, its the front.

  4. Default

    Lol on the fronts i wana put 19x8s so that should be fine?

    Hmmm the 19x10s on the rears lol maybe to ambitious?


    ---
    I am here: http://tapatalk.com/map.php?etb1u0

  5. #5
    Join Date
    Sep 2011
    Location
    Prospect (Sydney)
    Posts
    381

    Default

    that should be fine, possible scrubbing on inner guard. 10's in the rear, might end up being a lot of work and $$$$

  6. #6

    Default

    Quote Originally Posted by Devil MPS View Post
    that should be fine, possible scrubbing on inner guard. 10's in the rear, might end up being a lot of work and $$$$
    +1

    I believe there is a guy in the states attempting this aswell. From what others have said looks like possible panel work to fit then nicely.

    Sent from my GT-I9100 using Tapatalk
    Metro Grey '08 MPS Sports - Cobb SF SRI - 17x9 +45 Enkei RPF-1 - 245/40 Yoko AD08s - 163fwkw on Tunehouse Dyno

  7. #7
    Join Date
    Aug 2009
    Location
    hunter valley
    Posts
    6,403

    Default

    GOOD LUCK! I'd say no and dont.. u'd have to tub the rear by this i mean the guard would have to be pushed out. the tyre/rim is too wide for the weight and will skip around corners, the only way you would stop the skip is go a tyre with taller walls so theres give. BUT than you cant get them under there so more work would have to be done to the guards. 9' wide max dropping back to a 235 tyres, if your going for looks go a 19x8.5 with lower offset at least the weight of rim will be less :P
    Many want Power not many hold it long.........

  8. #8

    Default

    all depends on offset also...

    Im running 18x9.5 +35 atm with rolled guards only and theres slight scrap on the rear bumper plastic thing

    but yeah im sure 18x10 is achieveable with some neg camber and rolled or pulled guards.


    Regards,

  9. #9

    Default

    lol, don't.

  10. Default

    Haha ok maybe not tens but what will be the biggest size without much hassle?


    ---
    I am here: http://tapatalk.com/map.php?g2sti0

  11. #11
    Join Date
    Sep 2011
    Location
    Prospect (Sydney)
    Posts
    381

    Default

    anything wider than stock you'll more than likely need to roll the guard, pending on how low and offset.

    Running stock suspension?

  12. #12
    Join Date
    Aug 2009
    Location
    hunter valley
    Posts
    6,403

    Default

    Quote Originally Posted by black mamba View Post
    Haha ok maybe not tens but what will be the biggest size without much hassle?


    ---
    I am here: http://tapatalk.com/map.php?g2sti0
    Rolled lip can see you 8.5 +40 maybe +35..
    Many want Power not many hold it long.........

  13. #13

    Default

    did you miss my post? Im running 18x9.5 +35 lowered on H&R and rolled guards not that hard to roll guards also

  14. Default

    Quote Originally Posted by Bankai View Post
    did you miss my post?
    +1 look at his post dude

  15. Default

    Nice 9.5s..
    Can you show me any pics of how they look?


    ---
    I am here: http://tapatalk.com/map.php?dtl5yh

  16. #16
    Join Date
    Feb 2010
    Location
    Warranwood, Victoria
    Age
    35
    Posts
    1,546

  17. Default

    Dude ur ride looks sick man


    ---
    I am here: http://tapatalk.com/map.php?hztr10

  18. Default

    Yep it's one of the nicer 3 MPS I have seen. What sort of wheels are you planning on buying?

  19. #19

    Default

    thanks guys its up for sale *wink wink shove shove nudge nudge* haha

  20. #20

    Default

    is it sold yet?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •