Hey guys,
seeing as you're now vendors etc
just thought i would ask some questions following up from this thread:
http://www.ozmpsclub.com/forum/edge-...solutions.html
know that there is 2 others who have bought big hairdryers off you as well, so this could be relevant to them as well
I remember seeing some discussions on a thread in MSF about a few of these things, but searching those boards is painful (cant search for 3 letter words), and asking will just get me insults and/or told to "search you brownie ****"
I remember some of the tuners discussing EWG/IWG along with MBC and EBC, think they were saying the best combo for the 2 is EWG/EBC and IWG/MBC. Is there any specific reason for this? or is it just a tuners preference?
I've picked up a GT3071r IWG, and have a gimmspeed EBCS, primarily cause i would like to be able to limit the amount of boost in 1st and 2nd a little (also less screwing around with EWG), but also cause it gives me the ability to vary the amount of boost throughout the rev range, rather than being limited to a certain PSI in boost.
Also, with the Grimmspeed EBCS, i read about some people running it in "2-port mode" with a "pill" rather than "3-port mode", just wondering if you could share some light on each of these 2 options?
Finally i've read that you should be able to flow enough air in the stock sized 2.5" MAF to get 400fwhp (300fwkw), if people dont need/want more than that, is there any specific need to upgrade to the 3" MAF housing?
sorry for the essay