User Tag List

Results 1 to 1 of 1

Thread: How-to install prosport gauge and block8head pod

  1. Thumbs up How-to install prosport gauge and block8head pod

    This is for LHD, but the RHD can use the same steps to install the gauge..
    This how to is very long, to make it short i edited all the pictures with explanation to make it easy for you guys to follow....
    There might be a little step missing here and there,but nothing major so don't worry about it...
    Thanks to jman46 for bringing his car to my house to install the gauge and pod....
    This how-to is for the prosport mechanical gauge,the premium gauge is the same except you don't run the vac-line all the way to the gauge, but everything else is the same...
    You can also use this how-to to install other gauges as well.....
    In the picture only show the red 18 gauge electrical wire"you need to get black 18 gauge wire for grounding"
    As for the Vac-line, you will need to get atleast 10+ feet otherwise you will be short...
    Tools needed for the install:



    Step 1:







    Step 2:
    From the prosport gauge,it has 4 wires
    Black = Ground
    Red = Power ACC
    Orange = Amber.. Connect to dimmer switch wire for nightime or you can use it for daytime by connect it together with RED wire
    White = White lighning.. Connect it together with RED wire for daytime or connect it to the dimmer switch for night time.....
    Note: if you just want WHITE or AMBER for just daytime and nighttime. connect that wire together with RED wire and leave the other one unconnected...



    Step 3:



    Step 4:


    Step 5:

    Step 6:



    Step 7:

    Final Step:



    RHD MPS 3:








    Once everything is done,you can start it up and go for a test drive....
    Enjoy...
    Last edited by block8head; 12-09-2011 at 04:18 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •