Originally Posted by
MikeyACT
Run the wires through the grommits in the floor of the hatch. There is one on either side. It is easier to remove the side paneling insdie the hatch, but if you can get your hands down the access holes (one where the jack is and the other is below the hatch light, you can pull the wires up thorugh the grommit and attach the to the rear of the brake/parker lights. If no cables are coming through the grommits (on the drivers side I had cables going through it for the reverse parking sensors and my reverse camera) you will need to cut a small hole to pass the wires through. There is just enough wire to make it through to the lights.