User Tag List

Results 1 to 3 of 3

Thread: How to: Install LED Fog Lights

  1. Default How to: Install LED Fog Lights

    Got a pair of LED lights the other day for my fog lights, and i have no idea how to install them!!

    What is the best way to go about attempting a job like this? I looked under the bonnet and realised that it was too hard for me to do it through that way, so is it better to just jack up both sides of the front of the car and do it from the bottom? Do i need to remove anything from the car to get to the Fog Lights?

  2. #2

    Default

    There are 3 (Philips head) screws under each side of the front corner of the bar.
    Remove these to allow access to the rear of the foglight .
    Unclip the foglight bulb plug.
    Twist and pull out the foglight bulb.

    Installation is a reverse of the above procedure.

    All this can be done while the car is on the ground (easier if the car is at stock height)

  3. #3
    Join Date
    Oct 2009
    Location
    Moorooka, Brisbane
    Age
    49
    Posts
    7,059

    Default

    There's probably a manual in the glovebox. I found this very useful

    Hope they're H11's. The first set I ever bought were 9006. If only I'd read the manual.

    Drop in some pics when you have them done!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •