Corksport Downpipe installed
hey everyone i thought i would do a write of my corksport downpipe i installed yesty... and show a few pics....
the dp took about 4.5 hours to do and with a 3 inch system to my resonator... it was frustrating trying to get the heat shields off on the top cat but finally got it... but it was much easier than i thought it would be... i removed my tip sri tmic and unplugged my o2 sensors then removed all the heat shields i could from the top... then lifted the hoist to proceed the removal of dp. i undid the tail shaft and removed a underneath brace this made pulling the dp out from the bottom so much easier... it took 3 hours to pull it out and about 1.5 hours toput all back together and weld new exhaust and high flow cat.... so much easier bolting it up with the excess room to move around.... am happy witht the result and no CEL
i would add photos but i the files are to big...
~ Radiant Ebony 2005 Mazda 6 MPS ~
SURE REM - SURE TIP & SRI - Corksport 3" DP - Custom Exhaust - DGR Coilovers - SuperPro RSB - CX Racing FMIC with a 2xs touch - 2xs SSP - NGK Iridium Plugs - Autotech FP internals - AWR TMM & PMM Engine mounts - COBB AP - Hankook Ventus S1 EVO2 225/45/18 on custom painted stock black rims - Gold Brake calipers
Dagher Tuned 195kw atw / 425nm