User Tag List

Page 3 of 4 FirstFirst 1234 LastLast
Results 41 to 60 of 68

Thread: Remsa High Performance Brand Pads!

  1. #41

    Default

    Yea similar but it happens bother sides and only After a hard run... I think u may need to bed the pads in again like Greg mentioned

  2. #42

    Default

    @gslrallysport @37371118 did you fix the problem with the noise?
    My front remsa pads are making noises when slowly coming to a stop.
    All pads are fitted correctly.
    I have dba t2 slotted rotors


  3. #43
    Join Date
    Apr 2010
    Location
    Canberra
    Posts
    9,459

    Default

    Quote Originally Posted by haveheart View Post
    @gslrallysport @37371118 did you fix the problem with the noise?
    My front remsa pads are making noises when slowly coming to a stop.
    All pads are fitted correctly.
    I have dba t2 slotted rotors

    Go out on the highway, give it a few solid stomps on the brake pedal from 100-110 kph...
    Newbie FAQ My Build Thread
    From stock, to GT3071, to substantially less modded, many lessons learned!
    3" HTP | 100 Cel DP | Autotech HPFP | AP V3 - Self Tuned on E20 | JBR RSB | CPE S2 REM | JBR Shifter Bushings

  4. Default

    Yep, that's a good suggestion. Sometimes the Remsa pads need some decent heat cycles to properly bed them in. How many kilometres have you done on them since installation?

    Also what is you invoice number just so I can confirm what you have been sent?

    Regards Matt

  5. #45
    Join Date
    Oct 2012
    Location
    Brisbane Southside
    Posts
    527

    Default

    Another thing, if the calipers are not clean and properly lubricated, especially on the sliding surfaces, then it does not matter what pads you put in, they will still squeal.

  6. #46

    Default

    Maybe mine weren't fitted properly been on my car for long time now and still making noise after warmed up. But I think I kinda get used to the noise now :P

  7. #47
    Join Date
    Apr 2010
    Location
    Canberra
    Posts
    9,459

    Default

    My a1rm's squeal a fair bit...
    Couple of hard stops sorts then out reasonably quickly...

    Hard pads + slotted rotors do squeal more too...

  8. Default

    The Remsa pads really shouldn't squeal. I actually run the Remsa pads on my own car (VW Bora 4Motion V6) and have never heard a peep out of them. You may have some glazing of the pads occurring. You can try giving them a scuff on some smooth concrete to refresh the face of the pads and remove any glazing. While there out, check that all the slides are greased sufficiently and that there is no build up of road or brake dust around the pistons or bridge side of the caliper. Also make sure that the spring clips on the back of the pads have plenty of tension in them so they squeeze tightly into there positions.

    Good luck

    Cheers Matt
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  9. #49

    Default

    @gslrallysport Order number is 113676.
    I will try and put some heat into them. Whats the most appropriate way to bed them in again? How many times is sufficient? I think last time I did a few at 60kph then 80kph. Is it necessary to let the rotors cool down after before you can leave the brake pads in one spot? that in regards to having an even finish on the rotors. No idea how long they take to cool down... I don't think mine have any glazing on them. I recently had them all apart because I painted my calipers. I only greased up the pistons, and made sure springs had tension. I didn't grease the slides. Not sure how many k's I have done on them. 500-800k's maybe.

  10. #50

    Default

    Can I find out the current pricing for a set for my gen 1 mps3 (front)?

  11. Default

    Quote Originally Posted by haveheart View Post
    @gslrallysport Order number is 113676.
    I will try and put some heat into them. Whats the most appropriate way to bed them in again? How many times is sufficient? I think last time I did a few at 60kph then 80kph. Is it necessary to let the rotors cool down after before you can leave the brake pads in one spot? that in regards to having an even finish on the rotors. No idea how long they take to cool down... I don't think mine have any glazing on them. I recently had them all apart because I painted my calipers. I only greased up the pistons, and made sure springs had tension. I didn't grease the slides. Not sure how many k's I have done on them. 500-800k's maybe.
    When you say you greased the pistons, what do you mean? Also did you paint the calipers off the car, or on the car?

    The easiest bedding in procedure can be seen here, http://qfm.com.au/userfiles/files/BE...-PROCEDURE.pdf

    You want to wait a good 10-15 minutes to let the brakes cool down between bedding in applications.

    Regards Matt
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  12. Default

    Quote Originally Posted by lovecolt View Post
    Can I find out the current pricing for a set for my gen 1 mps3 (front)?
    The price currently for Remsa front pads to suit MPS 3 is $99 inc gst for the set. Give us a call to place the order, 1300 884 836.

    Regards Matt
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  13. #53

    Default

    whoops, i meant pins, not pistons. I wrote that late last night lol. I painted them off the car, I don't know how you could do a good job painting them on the car??

  14. Default

    Quote Originally Posted by haveheart View Post
    whoops, i meant pins, not pistons. I wrote that late last night lol. I painted them off the car, I don't know how you could do a good job painting them on the car??
    All good. On the car is possible, and it is dodgy as hell. But some people do it, you just need a shite load of masking tape and news paper lol.
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  15. #55

    Default

    I did the bedding in procedure last night. If I still get noise I may take the pads out and double check everything over the weekend. I hate taking the front pads out on the mps because of the clip that is under tension holding the outside pad in. Last time I tried to put in on after I just painted my calipers, I slipped and it put a big chip on the front of the caliper!! Any other tips while I have them out @gslrallysport

  16. Default

    Quote Originally Posted by haveheart View Post
    I did the bedding in procedure last night. If I still get noise I may take the pads out and double check everything over the weekend. I hate taking the front pads out on the mps because of the clip that is under tension holding the outside pad in. Last time I tried to put in on after I just painted my calipers, I slipped and it put a big chip on the front of the caliper!! Any other tips while I have them out @gslrallysport
    There really isn't anything else you can try sorry. If everything is greased and fitted properly you shouldn't have noise. I thought maybe if the pads didn't any side shamfers, you could grind a shamfer into the leading edge of the pad, but they already come with shamfers.

    Let me know how you go.

    Cheers Matt
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  17. #57

    Default

    What are these like in the way of brake dust?

  18. Default

    Quote Originally Posted by Skeet View Post
    What are these like in the way of brake dust?
    Hi,

    These do produce a little bit of dust, but it is nowhere near as bad as say an OEM pad or Bendix equivalent. And the dust they do produce is actually comes off the wheels quite easily.

    Regards Matt
    - GSL RallySport - Ph: 1300 884 836 -
    Sick of paying too much for high performance brake pads? Want high performance and cold bite with low rotor wear?
    - QFM Performance Brake Pads -
    Also specialising in
    - DMS High Performance Shock Absorbers - Monit Rally Computers -

  19. #59
    Join Date
    Apr 2014
    Location
    auckland NZ
    Posts
    173

    Default

    How just purchased a set of remsa pads.... Just waiting for them to get over here to nz now. Will update when I have em on the car

  20. Default

    Hey guys,

    I'm in need of new front pads and rotors. Instead of just doing the front I'm looking at doing the rears too; get it all done at once.

    I have a 6 MPS and don't track the car. Just wondering what you would recommend for a disc and pad all round and a price?

    Cheers,
    Jason

    Sent from my Tab2A7-10F using Tapatalk

Page 3 of 4 FirstFirst 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •