Junior Member
Mazda 6 Turbo upgrade
hey guys
I was getting grief yesterday by some panel and paint people yesterday that my MPS 6 is pretty much a ford mondeo well at least the engine side any way !
this got me thinking and I was wondering if its possible to bolt on a turbo of and XR6 Turbo has anybody had a look at doing this
When re doing the turbo in a MPS6 or 3 what else has to be done apart from internal re tune and you intercooler ??? who has been down this rocky path and has some advice ?
Cheers
based on the fact it's a 3582, i think you would need to do a hell of a lot of work on it
What model turbo is used on a FG XR6 Turbo, need a/r's etc - www.fordmods.com
snertspeed had a gt35 (i think)
troy had a 2876
mps2nv has a 3071
luke has a 3076
you would be looking at a full engine rebuild... forged internal etc
---------- Post added at 08:20 AM ---------- Previous post was at 08:19 AM ----------
also, mondeo = 4 cyl fwd, xr5 mondeo = turbo 5, fwd
6mps = turbo 4, awd
Newbie FAQ My Build Thread
From stock, to GT3071, to substantially less modded, many lessons learned!
3" HTP | 100 Cel DP | Autotech HPFP | AP V3 - Self Tuned on E20 | JBR RSB | CPE S2 REM | JBR Shifter Bushings
Forum Regular
Our car is closer to the volvo S60
Fabrication Yoda
Focus and Mondeo (non XR5) are 4 cylinder
XR5 models are turbo 5 cylinders. Same as Volvo S40
All built on the same paltform as the 3 (incl MPS)
The 6 would be slightly different.
The question is, how far do you want to go with your car?
Snertspeed, Luke and MPS2NV all have/had built motors. I didn't.
Posting Permissions
Reply With Quote
