Luke, I hope its all worth it mate. Get well soon.
Sent from my Huge Samsung Note 2
Luke, I hope its all worth it mate. Get well soon.
Sent from my Huge Samsung Note 2
Attachment 13178Attachment 13179Almost done, have to sort out rubber grommet for intake and cold air feed from bumper
- - - Updated - - -
I suffered a back injury friday .
Many want Power not many hold it long.........
Awesome!
Lookin good their Luke!
Keen to see the final result
Attachment 13183Attachment 13184I had a cock up a miss angle caculation, im after a 60 degree silicone elbow can anyone help!?
Looks good mate, does it still give intake noise? or quitened it right down?
Out of my league mate
Thanks to my dads help again today (since i have a bad back) i got a bit more sorted. Thanks To Rutherford Muffler Centre again they had a 60 degree 3' pipe in stock
Attachment 13199
Attachment 13200
Attachment 13201 3' hole for CAI
Attachment 13202This is where the cold air feed come out at front bumper (the blue/black pipe)
Many want Power not many hold it long.........
Awesome mate
Looks good!
Now log some IAT values so we can see the differences!
Just a thought.. Would using a heat reflective/ dampening on the outside drop the temps more??
MUFFLER HEAT SHEILD 3M STICK ON ADHESIVE 200 X 360mm | eBay
Well i found a place that sold everything i needed to do it as i wanted. Silicone hoses+ducting+bits, i have now ordered and awaiting delivery.. Should be a week or 2 than install and tune
Last edited by RedDjinn; 05-12-2012 at 05:38 PM.
Awesome work mate, great pics too. I appreciate the posts and the effort you put into this. Custom stuff is hard, and can be expensive, but you have done really well. I have some plans to try some carbon fire parts, this has helped get my head around some areas of it. Tanks again.
Absolutely, reflective shield will assist. I used a similar product on my first experimental box. Currently i use a product available from most Clark rubber outlets ,much cheaper and up to 2.5 mte wide and cut to any lenght,(6mm thick with a reflective paper adhered) and this is surrounding my CPU unit.
Found my IATs to be constantly ,lower at low speeds. IE traffic
Good luck Luke.
Way to many mods, way too much money spent,way way too much time spent = the wifes no 1 Enemy.But i,m Smiling
Cold air feed installed and ready for airbox
Well teh time has come! Has it worked? will know very soon, TuneHouse tomorrow. Pick up and find results thursday