Our small group has almost finished with the CX7. The car runs really smooth, and has plenty of power on tap. The limiters have been raised, and fuel economy is about 8-10% better than stock. And, no...
Type: Posts; User: Sassimac
Our small group has almost finished with the CX7. The car runs really smooth, and has plenty of power on tap. The limiters have been raised, and fuel economy is about 8-10% better than stock. And, no...
Currently our Tuning Group of Enthusiasts are redoing the map definitions with more explanation and tips. This will make it easier in the long run.
If you want any info, contact me offline.
Shame no one is interested......
Go buy MazdaEdit for $250Us and get a Tactrix cable from the USA. Total cost is about $450Au. The software is so easy to use....!!!!!
You can tune your own car, and back up the ECU stock file....
Tuning shops will possibly be using this software. And I would be asking questions of them about what they are using....!!!!
Anyway.....
1: Does it read? Yes.
2: Does it write? Yes.
3: Can...
In case anyone is interested.....
Software and hardware is now available that allows you to flash tune your own car. It works just fine, and lists most of the MAP tables for the car. It also...
Anyway.
I just popped in to let you know Epifan is now selling the software to DO YOUR OWN mapping......... Send him a PM. Pricing is done........
ecuEdit • View topic - Mazda support...
I was banned from a CX7 forum for pointing out my car was almost as quick 0-100kmh ( I have all results logged ) as a car with CPE exhaust, CPE controller, CPE throttle flash, CPE CAI, some CPE fuel...
The tune is available in:
Melbourne = Me..!!!
NSW = Sam at EPS-Auto
QLD = Contact me...!!!
Kits are in final stages of quotes.
At this point, all panning out 100%, they will be well below what the USA shops have them listed.
I am glad you are happy Jim.
Thanks again for the...
The file is sent, don't worry...!!!
I ended up running the laptop on my 3G wireless link with the power supply plugged into a beeping UPS...!!!
And when that died, I still had about 2 hours...
Well, I can only speak for my CX7.....
The dashhawk reads 4kmh slower than the Speedo.
When I sit in flowing traffic ( it does that in MELBOURNE..!!! :) ) I constantly see this 4kmh difference.
Thank you for the kind words. I did very much enjoy our chat.
Story for you MPS Jim.
After you left I hopped online to send the file off. Then BAMM...!!!! Power went out. Looks like a car hit a...
Must always run as admin.....
Now you know why I use a Mac and XP......
Click the link dude.....
Click here.
Grab 2.5 beta9. Install the software and update your dashhawk.
Use the profile file. It will have everything you need.
What is it you want to confirm?
This has been around for ages for a CX7.
CPE charge for goods in a variety of ways. One is the more bends, the more it costs.
DUH.......
I have a throttle control flash. If the demand is there, I'll look into a throttle ONLY flash..
Remember, if you want to keep the piping cold, you can get a heatproof exhaust wrap.....
Was actually a serious PITFA...!!!!
I had to move the radiator back about an inch to fit it all. It looks easier than it actually was..!!!
I ended up using a core from JustJap in NSW. They had heaps!!!!
The size I used was 180mm x 550mm x 65mm with 2 1/4 inch outlets. They still have them at $169. ( I paid $120 back then )
I...
That's fantastic, good on you..!!!
A word of advice. Take a bucket of pictures. And keep some record on how and what you did. You never know, you may pioneer this for others.
In the long run, I found that a $120 intercooler did the job fantastic.
Again, my point is still.... Buy what you feel happy about. No problems there..!!
R&D + Intercoolers.??
Sorry, it's crap. I have looked into this stuff, and you are paying for profit. I know one mob charged a crapload for the Astra FMIC kit. And they sold it with a replacement...
What I find interesting, is no one is prepared to give this a go themselves.
With my old astra turbo, I fittd a full front mount for about $400. I used off the shelf stainless bends and tubing,...