+1 on the cpe. I have one and it's a great mount.
Type: Posts; User: Geo
+1 on the cpe. I have one and it's a great mount.
Clutch drag? Great read this one.
Good luck.
Clutch Drag Kills Synchros! – Jacks Transmissions
Can’t shift at high RPM.
Most clutches will drag at high RPM if there is a problem. If you...
You say you were disappointed to see the MPS only came in manual but Mazda have done this for a reason.
Why go to all that trouble converting it to an automatic.
The MPS is a nice car to drive...
Hey guys,
Anyone know of where I can go to get the 4th gear WOT for AP tuning in Brisbane without losing my license?!
Cheers.
Your best bet is to contact Mazda ask them if they've done it before on an MPS before sending it in.
Scratch this, got home and switched the coil from cylinder 1 to cylinder 3. Took for another drive with another error code. Brought it home and fault was in cyliinder 3 now.
New coil needed.
Hi,
Had a P0301 misfire at the weekend. Discovered it was water that was sitting around the ignition coil. I cleaned the water out and car ran fine.
Last night I got the misfire again same...
Hey mate I figured it out. It was the Bump stops after the Bilstein B6's were installed. The Bilsteins are considerably fatter than stock shocks so Fulcrum had to cut into it in order for the shock...
Hey guys.
Long story short. Do not get Fulcrum Stafford QLD to do anything on your car.
So I needed a new front right inner control arm bush and decided to get the front shocks replaced with...
I've had mine in 6 days now and I'm delighted with it. Ive got 5500k bulbs in it with the 35w ballast packs. Takes about 1s to light up but partly due to my battery on its last legs.
Resurrecting an old thread but does anyone have any recommendations on rear link pins/end links?
I can get whiteline one's tomorrow for $146 for the pair (I need to replace both). Reading on here...
Hey mate. I've just done this myself on my 3 MPS BK. I got Morimoto D2S kit but had to cut the lumes and solder on 9006 female connectors so can never go back to OEM.
Up to you but for the guts of...
I've bought the car anyway. Needs a bit of TLC but that's partly why I bought it.
Yup that's exactly what GSL quoted me. I'll be picking them up in the coming months :y:
You're very lucky you walked away for that price then. There's too much to be done for $11.5k. Only reason I'm entertaining this price is because I can do it myself with the help of my mechanic...
Haven't picked it up yet. Getting it for $10500. Having another look tomorrow before buying it. Is this one of the greys with 19" wheels and 30 profile tyres? There was two of them, wouldnt be a...
Yeh battery will be $200. $900 for the rest with just the handle and washer jet to source. Which I can take my time on.
The brake pads and rotors will do until next service so the immediate...
Been in touch with GSL. Decent but not overly expensive brake pads rotors and two rear shocks will set me back $970. I'm happy to pay that knowing that there will be good quality parts in.
Leaving...
No point getting really cheap stuff in it. Will keep that in mind.any idea how hard it'll be to find colour coded door handles and a new washer?
Might be a few cars in the wreckers maybe?
Hey guys. She's got back and accepted my offer of $11k. My partners brother is a mechanic and works on MPS' quite often so he can do all the fixes outside of work hours with no labour costs.
The...
Never mind. Found out for myself. Needs about a minimum $1000 worth of fixes. Engine and Turbo seem solid but needs alot of cosmetic fixes. New rotors and brake pads. Rear shocks are totally screwed....
Hi OP,
I'm actually going to look at this exact car tonight. Any particular reason why you didn't buy it?
Cheers.