My wife has stolen my daily driver as its auto and Im currently driving her MPS to work, racking up close to 1000kms a week. As much as we love this car it is a bit to much for me to drive in Sydney...
Type: Posts; User: TBDM
My wife has stolen my daily driver as its auto and Im currently driving her MPS to work, racking up close to 1000kms a week. As much as we love this car it is a bit to much for me to drive in Sydney...
I fitted one of these kits 12 months ago, very tight fit and fiddly but it does all go together quite well.
I had to very slighlty bend some of the metal air con lines to make it all fit and one of...
No it is recommended that you did not inflate above 40PSI while seating the beads (fitting the tyre)
The max inflation stamped on the sidewall of the tyre is max pressure the tyre manufacturer...
Sorry I had no idea you were a tyre expert, good luck
Hub rings may cause vibration but not noise, what soprt of tyres do you have and how old are they?
I can source it direct through Mazda parts thats no problem & would prefer to stick with genuine coolant.
I'm more concerned about bleeding the cooling system properly
Has anyone done this before?
Anything to look out for when doing this on a 6, any special way to bleed these cooling systems or is it just like older cars with radiator cap off and let it idle while...
Im happy I bought my turbo form BNR in June, MPS GARAGRE = PATHETIC
I fitted one of these to my wifes 6 last weekend and no vibrations either
Do yourself a favour and purchase one anyway you can except through MPS garage, thats unless you want to pay for parts upfront and then wait anywhere from 1-20 weeks with all sorts of excuses as to...
These tyres are rubbish and should not be recommended for anyone with a performance car or anyone you care about. We have imported them before and had alot of problems. Including circumferntial...
I would not be paying for a new tyre if I was you and would be asking the tyre shop about the free road hazard warranty tha Hankook offer for there UHP tyres
Hankook Tyre Australia
Sumitomos are Japanese made, if you actually knew what you were talking about you wouldn't be bagging them.
I also sell a shit load of Falkens and they provide excellent value for money :2thumb:
...
I fitted slotted DBA rotors + hawk pads to the front & rear of my MPS 6 the other week, feels much better than the stock setup.
If you want to source the parts, I can fit them for you at my shop in...
Any mps6 owners got pics of where they mounted their DashHawks?
what are you going to replace them with?
Underinflation causes both edges to wear, but the wear you have on the inside is a wheel alignment issue.
Hard cornering causes the outside edges to wear a little more.
Judging buy the look of your...
Mate clearly you have no idea, its not about threatening customers . . . its usually about protecting idiots and other road users from morons driving cars with unroadworthy & dangerous tyres....
Im in Perth too and have Dougs CP-e catback system now fitted on my wifes 6, its very well made, easy to fit and with only a minor fitment issue which was outlined above.
It's to loud for me but my...
The Z2 are directional tyres and are quite an aggressive directional pattern and that is where the noise comes from, expecially if they get a bif of uneven wear on them.
The Z3 are Asymmetric and...
On the stock rims you should to run a 225/45R18 as they are better suited to a 7" wide rim, where in most brands the 225/40R18 is designed for 7.5 - 9".
PM me and I can help you out with a good...
Ooh that mid section looks nice and was just like what I originally had in mind.
I might just save my money and do the FMIC + Dump + Cat + Mid section all at once, depends on how much $$ I have left...
Yes will do something with the calipers, or maybe the mrs can do that :2thumb:
I was thinking black but Im just lazy
Tein coilovers, Marangoni are good so far, they are a huge improvement over the Hankooks & Kumho we had on the stock rims.
I have used them before on other work cars and they can be a bit harsh but...
Mine & Ms Mazda's MPS
18" Enkei GTC 01 & 225/40R18 Marangoni Mythos
http://i215.photobucket.com/albums/cc289/RX6/32053_398240068516_591098516_437907.jpg