How long after you flashed your tune did you take your log? I'm curious because there doesn't appear to be any LTFT present on your log. Have you attempted to cal your MAF?
edit: Sorry just read...
Type: Posts; User: newmaz
How long after you flashed your tune did you take your log? I'm curious because there doesn't appear to be any LTFT present on your log. Have you attempted to cal your MAF?
edit: Sorry just read...
Get you going but you'll may want to tune. dazza what map are you using? I was holding off fitting mine until I got all my other bolt on's done.
I'm pretty sure you'll need a tune rather than OTS map for the 3 inch due to its MAF size. Unless someone can point me to the map? I've just bought one of these and they are indeed worthy. However...
As Dazza has said it may not be the issue however it may point you towards a faulty bit of hardware or loose hose. I was thinking you may be overboosting if you had a faulty EBCS. If your's hasn't...
DannersAU did you do a boost leak test? If no i'd be doing one. One other suggestion is to have a close look at the OEM boost control solenoid as these commonly can crack as was the case with mine.
...
Could it be a broken engine mount?
Sent from my Nexus 7 using Tapatalk HD
I'm keen to do my side skirts with this method. In the guide it suggests acrylic or enamel. Can anyone fill me in on which to use on my black mps?
Sent from my iPhone using Tapatalk
Well spotted. I'm soon to put on a test pipe/tmic and looking at those dynos stage2 maps look like some serious gains. Like you I might give this a crack before going the whole hog Etune.
HOLLY F***** :eeksign: how the hell did I miss this.
Really! Oh well. I just bought the SU about 10 minutes before I got your advice. I guess we'll see. I have heard about a few recall (alignment) issues with them but also that they have a good core...
Yeah this blog is what convinced me to grab a new intake > Blog : Does a downpipe make a difference on a stock turbo MazdaSpeed3? : Stratified Automotive Controls written by Lex one of the tuning...
Glad to hear you guys got that drama sorted. God those valves were gunky. I'm betting mine are worse :eeksign:.How many km's on the clock? How difficult was the job beside the fault finding at the...
Dazza, Are you running a K04? I'm thinking about going wide path (with a test pipe) before getting an e-tune.
I would've thought 3" intake would've been an ample source but you're going bigger? Is...
They are a little disorganised it does seem. I got sent a package with wrong parts from what I ordered but Reggie sent the parts I ordered after that for me. So I think they are honest people to deal...
I was looking on his site for them but couldn't find them. Did you email him regarding those?
No, the only issue is with the smaller hole which is down the centre shaft that's slightly too small. When you drill out the 1.5mm with 1/16 inch it only laps a small amount of metal out of the hole...
I bought this one off ebay > Banjo Bolt Mazdaspeed 3 6 Restrictor Exhaust smoke | eBay
BNOON says however that the small hole on these bolts is too small (might cause oil starvation?). I simply...
I just received mine earlier this week. I'm hoping these may rid me of some of the knock issues i have noticed with my AP. I recommend Gina as a great person to deal with.
Wow, that's a novel idea. I wonder how the plastic will react with the alcohol. Is it a good seal? How long have you been using the system? Do you reckon it'll last?
Hey Ray, It's not 100% clear to me. Are you mounting the reservoir within this resonator box thingy? Then the black pvc capped pipe goes into the reservoir? Also does anyone know if the 3's have...
JBarone and Corksport RSB's build very similar. JBarone's build quality is top notch. I'm very happy with the results of mine fitted by a local suspension place.
rear bumper?
Can anyone confirm is this only an issue for the Gen2? Is our Gen1 OK for an USDM kit?
kritz what lint free rags did you use for cleaning the pump out? I'm kind of paranoid about leaving specs of crap behind in the pump body. What brand of contact contact cleaner did you use out of...
I was having what I beleive to be the same problem as you. Load cut when stepping on it after flashing an OTS stage 1 tune. I've now flashed back to 'stage 0' for some comparison. I'm yet to start...