Data on the topic one way or another very extremely difficult to locate I'd like to read some if you have any.
I don't think many people track their cars but down the drag strip, there are far more benefits to fatter tyres then in corners.
Printable View
Guys we will discuss the above in the moderators section. Please leave this be for now. Let's get back on topic.
Please play nice and remember sarcasm does not come across well in text..
Id encourage anyone to ensure that whatever fitment they are looking at is legal as some of the 'interesting' fitments ive seen these days are good excuses for insurance companies to NOT pay out claims.
Call me boring but wide tyres on skinny rims or skinny rims with wide tyres are just odd.
Hey Everyone,
im buying a MPS in the next few months and i want to know whats the biggest size and offset ETC i can put on a 06 to 07 Mazda 6 MPS can anyone Help?
it will be on BC coilovers and it will be my daily
Also depends on whether you want to stay legal or not which would limit what can be fitted
What sarcastic said but you can run with less offset say 40 just need to dial in some -camber
Hey guys,
I've searched absolutely everywhere, but is there anyone running 18x8.5 +30 for a gen2 MPS3 on coilovers?
Just wondering how much work is required to fit them and if BC coils will have enough camber to sit them flush?
http://www.mazdaspeedforums.org/foru...ad.php?t=99432
Sent from my Nexus 5 using Tapatalk
Seen that thread... But no photos :(
Sent from my iPhone using Tapatalk
They will fit, they will be flush (perhaps a small poke that can be fixed with camber) and you will want coils and to roll the rears.
This is 18x8.5 +40 (so another 10mm of poke is what to expect)
http://i41.photobucket.com/albums/e2...al/privat2.jpg
I did a test fit on my GEN2 with EVO X rims (18x8.5 +38) and any larger / lower I would have needed to roll the rears and added camber to the fronts.
MPS Model: bk gen 1
Wheel Brand: ROTA
Wheel size
- Diameter: 18
- Width: 8.5
- Offset: +44
Tyre size
- Diameter: 18
- Width:225
- Aspect(height):40 or45
Will you be Rolling the Guard's (Yes/No): no
Wanted Ride Height (When compared to standard): lowered springs couple of cms
Will you be running Coilovers (Yes/No): no
Will you have Adjustable endlinks (Yes/No): no
Will you be running SPC ball joints (Yes/No): no
MPS Model: '08 gen 1, series 2
Wheel Brand: ROTA
Wheel size
- Diameter: 18
- Width: 9.5
- Offset: +35
Tyre size
- Diameter: 18
- Width:235
- Aspect(height):40
Will you be Rolling the Guard's (Yes/No): yes
Wanted Ride Height (When compared to standard): slightly lowered
Will you be running Coilovers (Yes/No): yes
Will you have Adjustable endlinks (Yes/No): Yes
Will you be running SPC ball joints (Yes/No): No, but I can if I need to
Attached a couple of photos of a mazdaspeed in the US apparently running these special...
MPS Model: BK 2008
Wheel Brand: SSR
Wheel size
- Diameter: 18"
- Width: 8.5"
- Offset: +30 SL (Super low disk, 68mm of dish)
Tyre size
- Diameter: 18
- Width: 235
- Aspect(height): 40
Will you be Rolling the Guard's: Yes
Wanted Ride Height (When compared to standard): One finger gap all around
Will you be running Coilovers: Yes
Will you have Adjustable endlinks: Unsure
Will you be running SPC ball joints: Unsure
What degree camber will you be likely to running: Respectable degree of camber. More suited for handling rather than aesthetic appeal.