Corksport Downpipe installed
hey everyone i thought i would do a write of my corksport downpipe i installed yesty... and show a few pics....
the dp took about 4.5 hours to do and with a 3 inch system to my resonator... it was frustrating trying to get the heat shields off on the top cat but finally got it... but it was much easier than i thought it would be... i removed my tip sri tmic and unplugged my o2 sensors then removed all the heat shields i could from the top... then lifted the hoist to proceed the removal of dp. i undid the tail shaft and removed a underneath brace this made pulling the dp out from the bottom so much easier... it took 3 hours to pull it out and about 1.5 hours toput all back together and weld new exhaust and high flow cat.... so much easier bolting it up with the excess room to move around.... am happy witht the result and no CEL
i would add photos but i the files are to big...