Printable View
Hey
I want to install my Defi Boost Gauge and after researching i found i need to connect it up to my passenger fuse box with a blade fuse holder. But after searching through John R Turk and Jaycar i've been unfortunate.
Any help or alternatives?
NOTE: i suck at soldering...
Do you mean one of those piggy back fuse holders, keeps the existing fuse, then has another fused wire coming off the plug ?, ebay is where you find those
that sounds about right. yea i seen them on ebay but kinda stupid theres no local places cause i kinda want it done asap haha!
They are few and far between unfortunately, I bought mine off ebay from a local seller, only took a day or two to arrive.
I used these from jaycar for my boost gauge and they worked fine. Just replaced my cig lighter fuse with one of these (10amp) and connected the gauge. Remember to add another in-line fuse if you don't know which way the power is flowing (I.e. if the tap is before or after the fuse in the circuit).
http://www.jaycar.com.au/productView...p;form=KEYWORD
If that link doesn't work, try typing "fuse tap" into the jaycar search box, should get you there.
Good luck
http://www.jaycar.com.au/products_up...arge_13407.jpg
Sent from my evil apple using TapaCrash
thanks! i got it n it worked :D
No worries
Sent from my evil apple using TapaCrash