access port HPFP reading

hi there everyone...mid winter xmas has arrived and the accessport has arrived finally..
i currently have installed

autoexe tmic
sure tip
sure return tube
sure aeros with K&N pod
forge v1 BPV

accessport map stage 1 for the above mods with 98 gas

the HPFP internals and 1step colder plugs are being ordered at the sametime im writing this post..

my question is: if my HPFP reading on my accessport is at 1720psi at 80% throttle then goes down
as i ease the foot off the gas and sits at approx 1500psi at partial throttle is this
reading normal?..

any help would be appreciated

Sounds quite normal to me, what pressure reading do you get at WOT, this one is probably the most important one

Sounds right to me :)
WOT needs to be 1600+
And idle should be 400-450psi
Sounds like you've installed it correctly!

havent gone WOT yet... will give a go on the way home from work tonight at 10pm...i see 230kph before i run out of road..would be good to see if it pulls better

You don't need to be at redline in 6thgear to get logs, in case you didn't know

Sent from my HTC One X

think im in love....this accessport pwns..will load up a datalog tonight after work to have your guys opinions on my readings

Quote:

---

Originally Posted by kiwi

think im in love....this accessport pwns..will load up a datalog tonight after work to have your guys opinions on my readings

---

@kiwi how did the data log go? am interested to see how this works since I'll be getting mine soon

yea it came out good...apart from having to convert mph to kph..just have to figure out how to upload to the forum

Think I saw some use google drive and post a link here

You can upload them using the advanced reply.